Product Description
A, B series roller chain
SPECIFICATION:
1)A series chains:
A. Simplex: 25-1~240-1
B. Duplex: 25-2~240-2
C. Triplex: 25-3~240-3
D. Quadruplex: 40-4~240-4
E. Quintuple: 40-5~240-5
F. Sextuple: 40-6~240-6
G. Octuple: 40-8~240-8
2)B series chains:
A. Simplex: 04B-1~48B-1
B. Duplex: 04B-2~48B-2
C. Triplex: 06B-3~48B-3
D. Quadruplex: 08B-4~48B-4
E. Quintuple: 08B-5~48B-5
F. Sextuple: 08B-6~48B-6
G. Octuple: 08B-8~48B-8
3)Colors available: Natural, yellow, blue, black
4)Materiials: Carbon steel, stainless steel
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain |
|---|---|
| Material: | Alloy |
| Surface Treatment: | Polishing |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*11/128" |
| Structure: | Roller Chain |
| Samples: |
US$ 0/Meter
1 Meter(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the limitations of using certain types of paver chains in specific applications?
While paver chains are essential components in asphalt paving machines and provide various benefits, they may have limitations when used in specific applications. It’s essential to consider these limitations to ensure the appropriate selection of paver chains for different projects. Here are some of the common limitations:
1. Load Capacity: Some paver chains may have limited load-carrying capacities, which can become a limitation in heavy-duty paving applications or projects involving thick asphalt layers. Using chains with inadequate load capacity may lead to premature wear and failure.
2. Material Compatibility: Different paver chains are designed to work with specific types of asphalt mixtures. Using the wrong type of chain for a particular asphalt mix can result in poor material distribution, surface irregularities, or reduced pavement quality.
3. Environmental Conditions: Paver chains may face challenges when used in extreme environmental conditions, such as very high or low temperatures, heavy rainfall, or corrosive environments. In such cases, chains with appropriate materials and coatings should be chosen to ensure optimal performance and longevity.
4. Speed Limitations: Some paver chains may have speed limitations, especially in high-speed paving applications. Exceeding the recommended speed can lead to increased wear and reduced chain lifespan.
5. Maintenance Requirements: Certain types of paver chains may require more frequent maintenance, such as lubrication and tension adjustment. This can lead to increased downtime and maintenance costs if not adequately planned for.
6. Surface Finish: In projects where a smooth and finely finished surface is crucial, the choice of paver chains can influence the final surface quality. Chains that cause excessive vibration or irregular material distribution may result in a less desirable surface finish.
7. Compatibility with Paver Type: Paver chains should be selected based on the specific type and model of the asphalt paving machine. Using chains that are not compatible with the paver can lead to operational issues and potential damage to the machine.
It is essential to consider these limitations and conduct a thorough analysis of the project requirements before selecting a paver chain. Consulting with experts or manufacturers can help in choosing the most suitable chain for a particular paving application, ensuring optimal performance, and maximizing the lifespan of the chain and the overall paving equipment.
Can paver chains be used in airport runway paving and other large-scale projects?
Yes, paver chains are extensively used in airport runway paving and various other large-scale road construction projects. These chains are an integral part of the asphalt paving process, ensuring the smooth and precise laying of asphalt mix on runways, highways, and other expansive roadways.
Airport Runway Paving:
Airport runways require a high level of precision and quality to accommodate aircraft takeoffs and landings safely. Paver chains are used in specialized asphalt pavers designed for airport runway construction. The accurate control provided by these chains allows for the precise thickness and uniformity of the asphalt layer, meeting the stringent standards required for airport runways.
Highway Construction:
Paver chains are extensively used in highway construction, which involves the building of long stretches of roads and interconnecting highways. The uniform and smooth laying of asphalt facilitated by paver chains ensures the durability and safety of these major transportation routes.
Infrastructure Development:
Large-scale infrastructure development projects, such as bridges, tunnels, and complex road systems, also benefit from the use of paver chains. These chains enable contractors to create reliable and robust roadways that can withstand heavy traffic and environmental factors.
Municipal Road Projects:
In urban areas, paver chains are employed in municipal road projects. They play a vital role in creating well-maintained city roads, streets, and intersections, enhancing the overall infrastructure and facilitating efficient traffic flow.
Industrial Complexes and Ports:
Paver chains are utilized in constructing roadways within industrial complexes, factories, and port facilities. These areas often require specialized road surfaces that can withstand heavy machinery and frequent movement of goods and vehicles.
Overall, paver chains are versatile and well-suited for a wide range of large-scale road construction projects. They contribute to the longevity and reliability of roadways, ensuring safe and efficient transportation for various industries and sectors.
What are the benefits of using a high-quality paver chain in construction projects?
Using a high-quality paver chain in construction projects can offer numerous benefits, contributing to the overall efficiency and performance of the asphalt paving process. Some of the key advantages include:
1. Enhanced Durability: High-quality paver chains are constructed from robust materials and are designed to withstand the harsh conditions of asphalt paving, including high temperatures and abrasive materials. This durability ensures a longer service life and reduces the frequency of chain replacements, saving both time and money.
2. Improved Efficiency: A well-designed paver chain with precise engineering and manufacturing processes facilitates smooth and consistent material flow from the hopper to the screed. This results in a more efficient paving process, reducing interruptions and downtime.
3. Minimized Maintenance: High-quality paver chains require less frequent maintenance and adjustments due to their superior wear resistance and durability. This leads to lower maintenance costs and less downtime during construction projects.
4. Precise Material Placement: A reliable paver chain ensures the precise and uniform delivery of the asphalt mix to the screed. This accurate material placement contributes to a smoother finished surface and improved pavement quality.
5. Reduced Chain Elongation: High-quality paver chains are designed to resist elongation, maintaining their original pitch and length even after prolonged use. This helps to maintain proper tension in the chain system and prevents issues like sagging or misalignment.
6. Consistent Pavement Thickness: The use of a high-quality paver chain ensures a steady and consistent flow of asphalt mix, resulting in uniform pavement thickness throughout the construction project.
7. Operator Safety: A reliable paver chain reduces the risk of chain breakage or failure during operation, contributing to the safety of the machine operator and construction crew.
8. Higher Productivity: With a high-quality paver chain, paving machines can work at optimal efficiency, leading to higher productivity and faster completion of construction projects.
9. Better Overall Performance: When using a paver chain that is specifically designed for the application, the overall performance of the asphalt paving machine is improved, resulting in better pavement quality and a more successful construction project.
In conclusion, investing in a high-quality paver chain for construction projects can lead to cost savings, improved efficiency, and higher-quality pavements. It is essential to select a paver chain from reputable manufacturers known for their expertise in the field to ensure the best results.
editor by CX 2023-08-18
China 1 piece 14 Inch Chainsaw Saw Chain Drive Link Pitch 52 Link 38LP 050 Gauge Chainsaw Blade Garden Tools solid bush chain
Finish: black, ZINC, Simple
Product Number: 52
Framework: Tooth Chain
Standard or Nonstandard: Normal
Packaging Information: plastic bag
Remember to make positive your chainsaw running 3/8LP.Our chain is manufactured up to match the following Husqvar na types with a fourteen” bar and 3/8 minimal pro file chain,Suits for: underneath Husqv arna versions: 16E, 23, 33, 36, forty one, 136, 137, 55KW 75HP 3bar 5bar Low Strain Screw Air Compressor Price Tanker Unloading Air Compressor 141, 142, 243, 236, 236 e-series, 315E, 315, 316E, 316, 317, 318, Tailored Producer Micro Dc Equipment Motor Worm Planetary Gearbox Ac Shaded Pole Gear Motor 318E, 321, 325P4, 333, 334Made of Structural alloy steel 8660 components, hardened by quenching method after forming.
The quenching approach adopts total automatic temperature control therapy with substantial hardness, large density and put on-resisting. The tensile resistance is extremely great Specs: Type: SEMI Chisel Materials: Structural alloy metal Pitch: 3/8 Low Pro file Gauge: .050″ Drive Links: 52 Bar size: 14″ Package Contain:1 x Chainsaw Chains Observe: 1,Pls permit 1-3mm error because of to the manual measurement,pls make confident you do not mind before you bid. 2, Custom stainless metal sprocket for chain website link conveyor belt The colour may possibly have a liitle distinct as the difference display,pls understand.
How to choose a drive chain
The process of manufacturing a drive chain starts with bushing. Both inner and outer diameters are strictly measured to ensure tight tolerances. The roundness of the bushing is critical as irregular surfaces in the contact area can cause accelerated wear and shorten chain life. That’s why the CZPT manufacturing process is carefully designed to optimize the wear performance of the chain. There are several types of bushings including roller, forged rivetless, flat top, and timing.
roller chain
The tensile strength of a roller chain is the number of pounds it can withstand before breaking. Fatigue strength is equally important, although the two do not necessarily go hand in hand. Fatigue strength depends on several factors, including the quality of steel used in manufacturing, the quality of the pitch holes, the type of shot peening used, and the thickness and design of the link plates. Here are some things to consider when choosing a roller chain for a drive chain.
When sizing a chain, first determine how much power will be delivered. Then, determine how many teeth you need for the drive sprocket. The gear ratio is approximately 2:1. The number of sprocket teeth depends on the size of the motor. A chain with a higher tooth count requires fewer teeth than a smaller chain. The size of the drive sprocket also depends on the horsepower of the motor.
Before installing rollers or conveyor chains, make sure the drive system is properly aligned. If the drive chain is misaligned, the load on other components will be uneven. This can cause excessive wear on the sprocket or roller chain. Also, check that the sprocket is as close to the bearing as possible. Connecting links can be secured using openings or spring clips.
Different manufacturing processes can affect the performance of the roller chain. Some manufacturers have chains pre-installed at the factory to minimize initial stretch. Others build chains by preloading sprockets and ensuring consistent precision heat treatment. The final product may have greater elongation or less wear than previous products. It is best to follow the manufacturer’s recommendations to extend the life of the roller chain. If you are interested in purchasing a new drive chain, please contact a trusted supplier in your area.
Drop forged rivetless chain
Forged rivetless drive chains are ideal for applications where flexibility and strength are critical. The chain consists of forged steel components for high strength and lightweight. These chain assemblies are easy to assemble without the use of tools and are commonly used on carts, assembly lines, and drag conveyors. They are also compatible with related chain, drive, and accessory products. They have a short turning radius and therefore high flexibility and strength.
The X-348 Forged Rivetless Chain is an example of such a drive chain. This chain is perfect for automated machines that run late at night. It is available in a variety of weight limits and sizes. The chain is pre-stressed after assembly, and a two-year parts replacement warranty is standard. Its durability is also enhanced by the inclusion of push dogs that engage the front floating dogs on the leading free cart.
In addition to this type of chain, CZPT also offers a full line of Caterpillar Drive chains. They are designed to provide fatigue-free operation. The drive jaws are one-piece forged induction hardened steel compatible with forged rivetless chains. There are many special custom chains to choose from. These forged chains can be installed on Caterpillars as well as other types of tractors for maximum durability and efficiency.
Distributors of forged chain products offer a variety of sizes, pitches, and materials for material handling and conveying systems. Typically, this type of chain is used in conveyor and lifting applications and ranges from 3 inches to 9 inches. Depending on size and thickness, it is ideal for a variety of industries including automotive, food, paper, and steel mills. In addition, the chain is corrosion-resistant and corrosion-free.
flat top chain
The flat-top drive chain is used for conveying large and medium workpiece pallets. These chains are available in a variety of materials and designs, including plastic, steel, and stainless steel. The steel flat top chain provides high wear resistance and excellent noise reduction. Steel flat-top chains are suitable for applications requiring high loads and excellent workmanship. HD profiles are compatible with steel flat-top chains and are highly recommended for extreme applications.
CZPT produces two types of flat-top chains. Tabletop chains are similar to wing door hinges, while MatTop chains are assembled using full-width pins. Both types are available in standard widths of 3.25 to 12 inches and are shipped in 10-foot sections. Both types can be shaped according to the width of the chain.
Double hinge pin flat-top chains are available with a variety of hinge pins. There are TAB and standard hinge pins for different machines and drive methods. A flat-top chain with dual-hinge pins will provide higher load carrying capacity, but be aware of the hinge pin size and style required for your application. The hinge pins should be long enough to ensure a smooth and smooth delivery. Double hinge pin flat top drive chains are available in a variety of sizes and designs.
Using standardized components and modules, the flat-top chain conveyor system is highly adaptable and can be seamlessly integrated into any production process. It can also be extended to handle a wider range of containers. Using a single drive, the CZPT system can be extended to a length of 40 meters. Its versatility makes it the choice of many industries. There is also a wide variety of flat-top drive chains to choose from.
time chain
The drive chain is a critical component of any internal combustion engine. They transmit the rotation of the crankshaft to the camshaft via the timing chain. These chains have been standard in cars since the turn of the 20th century, and while toothed belts have become a more cost-effective alternative, manufacturers such as Mercedes-Benz and BMW remain loyal to traditional chain drives.
Timing chains come in many shapes and sizes, with different designs depending on the type of load they must carry. Roller chains are the most common and offer an excellent balance of strength and NVH performance. Its design is similar to a bicycle chain, and the inner link consists of two blades pressed into the holes of the sprocket. Roller chains can also pass through smaller diameter sprockets, and roller chains take up less space than chain links.
The length of the chain allows it to stretch over time. In addition, improper oil maintenance can lead to premature timing chain damage. Without an oil change, the chain is not lubricated, causing the rollers and links to rub against each other. This can cause excessive chain wear and eventually chain breakage. To avoid premature timing chain failure, it is advisable to have your vehicle inspected by a mechanic.
For automotive timing chains, the CZPT website offers the best prices for the timing chain you need. You can find the right timing chain for your car by registering on this website. You can also contact a mechanic to get the parts you need. If you don’t know how to diagnose your timing mechanism, you can always check the owner’s manual or the manufacturer’s website. It is critical to follow the manufacturer’s recommendations to avoid catastrophic failure.
Oil-impregnated bushing
Oil-impregnated bushings for drive chains are an excellent solution to drive chain lubrication problems. Usually, drive chains require additional lubrication, but by adding special oil-impregnated bushings, the chain can run without lubrication. Oil-immersed bushings, such as those of the CZPT brand for CZPT, are specially manufactured for this purpose. They capture oil during operation and release it onto the bearing surfaces, returning it to the bushing by capillary action.
Since their introduction to the automotive industry, engineered composite plastic bushings have been shown to provide longer service life and save up to 40% in maintenance costs. They have replaced bronze in thousands of applications, including pumps, medical equipment, and food processing machinery. Because oil-impregnated bronze bearings rely on capillary action, they must rotate to maintain a complete lubricating film. However, several factors prevent this film from fully forming, including low speeds and intermittent use.
During the manufacturing process, oil-impregnated bushings are manufactured to meet the wear resistance requirements of the drive chain. The sintered density of the oil-impregnated sintered bushing determines its mechanical strength. The larger sintered density increases the wear resistance of the oil-impregnated bushing but reduces the mechanical strength.
Whether or not a drive chain is lubricated will determine its overall life. Proper lubrication can extend chain life by 100% compared to a chain without proper lubrication. Proper lubrication means using high-quality oils without additives and oils that flow freely at prevailing temperatures. Indirect heating is required by immersing the drive chain in the molten pool as certain additives prevent oil from entering the chain joint.
editor by Cx 2023-06-15
China Hot selling 420/428/520/530 O Ring motorcycle parts marine/rigging hardware Motorcycle Conveyor link Roller Chain roller chain drive
Product Description
Double Pitch Transmission Chains with K1 Attachments -2040k1
A. Our Services:
1. Any of your kind inquiry about chain would be replied within 24 hours.
2. Well-trained and experienced sales staffs will reply all your concerns in fluent English.
3. OEM services are available with us, our professional designer would make your private idea into being.
4. Protection of your sales area, ideas of design and all your private information.
5. Delivery by air mail or ship for your orders.
6. With years of manufacture and promotion experience in global market, brings you profit and great success!
B.Technical parameters
C. Company show & Product Process
D. Packaging
| Packaging Details: | Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets |
| Delivery Detail: | five weeks |
E. FAQ:
1. Are you manufacturer or trade Company?
We are a factory founded in 1991 with trade team for international service.
2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight
3. what is your lead time for your goods?
Normally 45 days after confirmed order. 30 days could be available in low season for some items (during May to July), and 65 days during new year and hot season ( Jan to March).
4. Do you attend any Show?
We attend Hannover show in Germany, NMW in Austrilia, Canton fair, PTC, in China and many other special furniture shows.
| Usage: | Transmission Chain |
|---|---|
| Material: | Alloy/Carbon Steel |
| Surface Treatment: | Oil Blooming |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Customization: |
Available
| Customized Request |
|---|
Different types of drive chains
Drive chains are an important part of many different types of machinery. In this article, we’ll cover a variety of different types, from square links to engineered steel. From there, we’ll discuss different types of chains, such as double and leaf chains. Let’s take a closer look at each one. Once you know what kind of chain you’re looking for, you can make a buying decision. If you’re not sure where to start, read on to learn more about these types of chains, what to look for when choosing, and how to choose the right chain for your specific application.
Engineering Steel Chain
Engineering steel chains are widely used in conveyors, bucket elevators, tensioning links, transmission chains, etc., and have the characteristics of high strength, low friction, and good shock resistance. Early models of these chains were developed for difficult-to-convey applications. They were originally made of all-steel components with flanged rollers made of cast iron. They then increase in size, strength, and spacing in response to the heavy-duty requirements of the industry.
Today, these chains are used in a wide variety of applications, including tough oil drilling operations and forklifts. They offer excellent durability and high power transfer and are available in a variety of materials. They are also ideal for harsh environments such as harsh oil drilling. Their high-strength steel construction means they can handle harsh operating conditions. Their durability is an essential feature of any chain, and CZPT Chains offers a full line of engineered steel chains to meet your exact specifications.
A drive chain made of engineered steel consists of several components: links, pin joints, and sprockets. This allows them to carry heavy loads with minimal stretch. Due to its internal mechanical advantage, the chain runs around the sprockets with almost 100% efficiency. Also, the chain is made of special steel that can withstand certain conditions. They are available in different alloys and grades. If you have any questions, please feel free to contact us.
Roller chain wear is a major problem for conveyor and drive chains. In these cases, the rollers of the chain are more prone to wear than the bushings, so lubrication is essential. Many chains are designed to work with little or no lubrication. Finally, material selection is an important factor in the design of engineered steel conveyor chains. These factors will help ensure that the chain stays in good shape.
Conveyor Chains with Square Links
There are two basic types of conveyor chains. The first is the square chain, commonly used in cranes and hoists. It’s cheap to manufacture but more prone to overload. The second is a chain that uses hook joints or detachable links. These are used for short-term power transmission and have a lubricating effect. Usually, they are made of malleable iron but can be more expensive.
Another type of chain is the removable steel chain. For moderate loads, this is an easy-to-install option. The closed end of the tab should face the sprocket. It is very important to maintain the alignment of the chain relative to the sprockets. The chain should be adjusted to suit the load before installation. It is important to keep the chain lubricated to prolong its life.
Steel chains offer a wider selection of materials and heat treatments. This chain is also more accurate than its counterpart. Steel bushing chains are less expensive but require more frequent lubrication. Steel roller chains are often used for long conveyor centers or high loads. However, lower friction requirements require lower strength chains. This means that chains with square links are a better choice for smaller conveyors. But this style has its drawbacks.
Bushing chains are made of steel and are an excellent alternative for small-scale applications. The pins are silent and prevent tooth damage. Bushed roller chains are also used to a certain extent as conveyor chains. However, the main advantage of the bushing roller chain is that it does not make any noise at all. Bushed roller chains are made of alloy steel and are suitable for very low-speed applications.
double chain
Double-strand roller chain, also known as a double-strand, consists of two rows of single-strand links. It has high impact strength, low weight, and a small form factor. Duplex roller chains are manufactured using CZPT technology, which uses solid rollers to improve sprocket tooth rotation and reduce shock loads. During the manufacturing process, the metal is heat-treated to increase strength and reduce corrosion.
A single chain is designed for a single sprocket, while a double chain consists of two identical chains connected side by side. Double chains are more durable than simple chains because double rollers contain roller bearings, pins, and other components. Simplex drive chains can handle high loads, while duplex drive chains are designed for medium-duty applications.
leaf chain
Blade chains are used in reciprocating devices such as forklifts. They are also used in machine tools for counterweight chains. Leaf chains come in a variety of lengths, usually with female or male ends. Leaf chains can be manufactured in even or odd pitches and are ideal for lifting and balancing. This article will introduce some key uses of leaf chains in drive chains. Additionally, we’ll discuss how they are made and how they behave in applications.
Most drive chains today are made from leaf chains. These chains are designed to increase the strength of the chain. However, they are less expensive than other types of chains. You can also purchase specialized leaf chains for certain applications. CZPT Chain also offers custom leaf chains for your unique needs. Leaf chains are commonly used in forklifts, material handling, and lifting applications. They are usually made from high-quality components. The BL1688 Leaf Chain has 8 x 8 laces and is sold in 10-foot boxes or 25- to 100-foot reels. The leaf chain can be cut as needed.
When selecting a leaf chain for a specific application, consider the minimum tensile strength of the chain. The minimum breaking strength must be high enough to protect the worker or machine, but must also be legal for the type of machine. Most manufacturers publish this minimum strength requirement. To make the most durable leaf chain, design engineers must consider the ISO4347 standard when choosing the right leaf chain. Leaf chain manufacturers tend to exceed international standards by about 20%.
roller chain
Roller chains are made from a variety of materials. Some common materials include steel and stainless steel. The most suitable material depends on cost, environmental conditions, and horsepower transmission design. Chain manufacturers can optimize the material for the intended use. Depending on its size, spacing, and special construction techniques, it can be made lighter or heavier. This is an advantage for applications in noise-sensitive environments. Below are some examples of common uses for roller chains.
The wear of the components in a roller chain is an unavoidable part of its operation. The amount of elongation depends on factors such as lubrication, load, and the frequency of articulation between the pin and bushing. Manufacturing critical wear parts require careful attention to detail. Proper raw materials, manufacturing, and assembly are critical to product performance and longevity. If these components aren’t of high quality, they won’t last as long as the chain should.
The industry recommends measuring the wear elongation of the roller chain to determine when it needs to be replaced. Proper safety procedures must be used to measure chain tension. The tight span of the chain shall be measured by applying the measuring load specified by ANSI. A correctly measured roller chain is safe to use. For motorcycles, the chain is bigger and stronger. Often, toothed belts are replaced by shaft drives because they are less noisy and require less maintenance.
Tensile strength is the most commonly used measurement method for roller chains. This measurement represents the amount of load the chain can withstand before it breaks. Fatigue strength is another measure of durability. Fatigue strength measures how long a roller chain can withstand long-term use before failing. These two measurements are closely related and maybe the same or different. In addition to tensile strength, fatigue strength is a useful factor to consider when purchasing a chain.
editor by CX 2023-05-17
China 18k Gold Plated Singapore Rope Chain 2mm 3mm 4mm 5mm Stainless Steel Silver Twist link Chain Necklace For Men Women Jewellery bush roller chain drive
Design Variety: J25710922007
Jewelry Principal Material: Stainless metal
Material Type: Stainless steel
Gender: Women’s
Major Stone: Crystal, Rhinestone
Jewelry Kind: NECKLACES
Necklaces Kind: Pendant Necklaces
Situation: Anniversary, Engagement, Gift, Social gathering, Marriage ceremony
Certificate Kind: None
Chain Type: Hyperlink Chain
Plating: Black Gun Plated, Rose Gold Plated, Silver Plated, Gold Plated
Shapepattern: Heart
Style: Trendy
Inlay technology: Claw Environment
MOQ: ten Pcs
Packing: 1pc/opp Bag
Packaging Details: Each and every merchandise is individually wrapped in a plastic bag
Specification
| merchandise | price |
| Jewelry Variety | NECKLACES |
| Chain Kind | Url Chain |
| Plating | 18K Gold Plated |
| Style | Fashionable |
| Inlay technology | Claw Location |
| Location of Origin | China |
| Model Variety | OUYA509 |
| Necklaces Variety | Pendant Necklaces |
| Jewellery Major Content | Stainless Steel |
| Major Stone | Crystal, Rhinestone |
| Celebration | Anniversary, Engagement, Present, Celebration, AUTOROUT portable12v nitrogen tire inflator with gentle automobile air compressor Wedding |
| Gender | Women’s |
| MOQ | ten Pcs |
| Packing | 1pc/opp Bag |
Roller Chain Maintenance Tips
There are many things to keep in mind when maintaining a roller chain. The main reasons include friction and external influences. Without proper lubrication and adjustment, such chains will wear prematurely. Here are some tips for keeping your roller chain in top shape. continue reading! This will make your process easier. We will also discuss the cost of the new roller chain. As always, remember to check for loose ends and adjust the chain regularly.
Preloading
Roller chains are designed to accommodate many different types of loads. Sprockets are the main cause of chain wear. Axial and angular misalignment occurs when the sprocket faces are not properly aligned. Both types of misalignment increase stress and wear on the roller chain. They can also negatively affect the drive. Therefore, choosing the right chain is an important consideration.
Preloading helps to eliminate initial elongation and extend service life. The benefits of preloading can be seen in the preloading chart. Significant elongation occurs during drive startup with no or minimal preload. This is due to the surface hardness of the worn parts. On the other hand, a properly preloaded chain shows little elongation during the initial start. Therefore, proper preload can prolong wear life.
Although elongation is a natural phenomenon in any drive, it can be minimized or eliminated with proper maintenance. In addition to regular inspections, you should do a full inspection of your chain after the first hundred hours. This inspection should focus on key life factors such as 3% elongation, how the chain is lubricated, and any other issues that may affect life. A good quality chain should have the longest life and no problems.
There are many different roller chain specifications. A good rule of thumb is to choose chains with at least five links. Then, tighten the chain until a break occurs, and it will tell you what kind of break occurred. Alternatively, you can use a roller chain with the maximum allowable load. As long as the MAL doesn’t exceed that number, it’s still perfectly safe to use it for any application.
lubricating
When it comes to lubrication, there are several different techniques. For example, spray lubrication is a popular method for high-horsepower drives and high-load and fast-moving machines. This method is very effective, but it is expensive, and spraying the chain too far out of the guard can cause leaks. Another common method is brush lubrication. Brush lubrication involves applying a continuous flow of oil to the chain, pushing it into the chain. This lubrication technique reduces the application temperature of the chain. Also, it can extend the life of the chain, depending on the manufacturer’s specifications.
While the lubrication of roller chain couplings varies by application, sprocket hubs should be lubricated monthly to ensure proper sealing. The amount of oil used depends on the rotational speed and the type of roller chain coupling. In general, lubricants used in roller chain couplings should have excellent adhesion, oxidation, and mechanical stability.
Wear-resistant lubricants are recommended. They prevent the rollers from sticking to each other and prevent rusting. These lubricants have low surface tension and are not harmful to metal or O-ring chains. The optimum lubrication method depends on ambient temperature, horsepower, and chain speed. Properly lubricating a roller chain increases the life of the chain and reduces the risk of wear.
Proper lubrication of the roller chain is essential to prevent corrosion and prolong its service life. The oil forms a smooth film on the chain components, reducing metal-to-metal contact and minimizing friction and wear. Additionally, the oil provides a smooth running surface and reduces noise. However, the running-in process of roller chain lubrication cannot be underestimated. When using heavy-duty oils, ensure that the lubricant is compatible with operating and ambient temperatures.
Maintain
To extend the life of your roller chain, you need to carry out regular inspections. First, you should check the T-pin on the link plate at the joint. If they are not connected properly, it can cause the chain to stretch and not maintain proper spacing and timing. Next, you should look for unusual noise, corrosion, and dirt that may indicate wear. If you notice any of these problems, it’s time to replace the chain.
In order to properly maintain a roller chain, both areas of the roller chain must be lubricated with the correct lubricant. Lubricants used should be SAE non-degreased oils. There are several types of lubricants available, but the best one is a petroleum-based oil with a high viscosity. You can also check for signs of wear, such as red or brown discoloration. This means that there is not enough lubrication.
While the life expectancy of a roller chain is unknown, it is important to know how to extend its life and maximize its effectiveness. Improper tension and alignment can shorten its life and place undue stress on the drive system and the chain itself. Incorrect tension can also lead to slippage and increased energy output. Therefore, you should calculate the tension and alignment of the chain during the initial installation. Check and adjust regularly.
Another way to extend the life of your rollers is to thoroughly clean the inside and outside of the rollers. You should also lubricate it frequently to prevent excessive heat buildup. Designed to prevent overheating by limiting the amount of work during break-ins. Additionally, regular inspections will help you catch anomalies early enough to stop operations. Last but not least, regular lubrication will prolong the life of the roller chain.
Cost
Buying a roller chain is a big decision, but initial cost shouldn’t be the only consideration. The cost of the roller chain itself, as well as the running costs, should be considered. Even the lowest-priced chains can be more expensive in the long run. Additionally, maintenance and energy costs may increase. The best roller chain for your business will be the one that best suits your needs. Listed below are some considerations to consider when purchasing a roller chain.
First, what material should you use? Roller chains come in many different materials. Stainless steel is a commonly used material in construction. Materials are selected based on the cost and design of chain horsepower transmission. Various manufacturing processes will determine which material is suitable for your application. Also, the weight of the chain will vary depending on its pitch and the construction technique used. A large part of the cost of a roller chain is on the drive sprocket.
Another consideration is installation cost. Roller chains are commonly used in agricultural and transportation applications, especially for agronomic products. If lubrication is your concern, maintenance-free chains are the best choice. Corrosion-resistant chains are ideal for wet environments. They are sold in boxed lengths, so replacing a longer length requires adding a shorter length. To avoid trouble, use the skateboard to help connect the links.
Another consideration is the overall width. The overall width of an open #40 roller chain may vary but should be at least 10 feet wide. Although it is not the most expensive type of roller chain, it will last longer. Using it correctly will increase its overall longevity, so it’s a good idea to choose it wisely. If your business uses roller chains regularly, the cost reduction is well worth it.
Application
A roller chain consists of a pair of alternating pins and roller links. The pins are pressed into the side panels and hinged to the rollers. Roller chains can be single or multi-strand, connected by a common pin. The multi-strand design provides higher shear strength for demanding power transmission applications. Typical applications for roller chains include conveyors, hoists, and other mechanical equipment.
The horsepower capability of a roller chain is limited by several factors, including pin shock and friction. While research into these factors has placed some limits on the maximum operating speed of the roller chain, practical experience has shown that these systems can be used at higher speeds. Proper lubrication and cooling can increase the durability of these chains. In addition, roller chain applications include:
Drive and conveyor systems are the two main uses of roller chains. During driving operations, wear and elongation are a natural part of the operation. However, lubrication plays a vital role in minimizing wear and shock loads. Therefore, wear is inevitable and special care must be taken to ensure proper lubrication. Additionally, lubrication reduces heat dissipation in the chain.
The materials used to make roller chains vary from one type to another. Stainless steel is common, but nylon or brass are sometimes used. These materials are less expensive and more durable than steel or stainless steel. The best material for the job depends on a variety of factors, including cost, environmental conditions, and design horsepower transmission. For example, the pin bushing contact area is a critical area requiring lubrication. Additionally, some coatings are designed to retard the corrosive effects of water or oil.
editor by Cx 2023-05-06
China 10-40mm Lobster Clasps Hooks Extending Chain Bracelet End Connectors Slider Clasp For DIY Jewelry Making Finding bush roller chain drive
Error:获取session失败，
Roller Chain Basics
Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, tensile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.
Roller sprocket
If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
The diameter of the sprocket is important when choosing the right sprocket for your application. Using a caliper to measure the diameter of a toothless plate is a good way to determine the exact size of the sprocket. A caliper is the diameter of a plate without teeth. On Type B and C sprockets, the hub diameter measures the thickness of the hub.
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with one pointing towards the ceiling and the other two parallel to the floor.
When shopping for sprockets, it is important to remember that they are designed specifically for a specific chain. All chains are manufactured to specific standards. In the United States, the most common standard is ANSI. The chain pitch is the distance between the center of each pin and the center of the next pin. In the US, the standard is always measured in eight-inch intervals.
In addition to sprocket size, sprocket pitch and the surface area also affect chain life. Unlike belt sprockets, which are made of forged steel, the teeth on roller sprockets are stamped from steel sheet or pressed from powdered metal. The harder the teeth, the longer the chain will last.
Roller chain pitch
The pitch of a roller chain is the distance between the sprocket and the pin. The smaller the thread pitch, the smaller the bushing wear. Generally speaking, the smaller the pitch, the longer the life of the chain. For best performance and longest life, manufacturers recommend a minimum chain pitch of 2% to 3%. Chain pitch is important to ensure proper performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of normal.
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
When sizing a sprocket, measure the chain between the gears with a caliper and compare it to the measurements on the chain size chart. Make sure you have checked all the specs and checked the correct chain pitch. Then, choose the correct chain pitch for your needs. This is a critical step in choosing the right chain. So get the correct pitch for your roller chain. Correct pitch helps ensure maximum performance and safety.
To identify a specific type of roller chain, measure its tensile strength. This represents the amount of load the chain can withstand before breaking. Another key parameter to consider is fatigue strength. Chains with high fatigue strength are more resistant to rust and wear than chains with low fatigue strength. The numbers on the right in the standard numbering represent normal or light duty chains, while the numbers on the left represent the pitch of heavy-duty chains.
Double pitch roller chains are a variant of single pitch chains. They are manufactured according to ISO 606 and meet the same standards as single pitch chains. They are mainly used in applications with lower requirements for speed and power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch drive series is also used for elevator and long conveyor drives. There are three main types of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.
Roller chain width
When buying a roller chain, one of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
There are many different types of roller chains. These chains are available for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are usually used for power transmission. Other types include agricultural, automotive, conveyor, multi-strand, and four-strand chains. These charts also include a chart so you can easily see the exact size you need. Listed below are some of the benefits of buying a roller chain.
Roller diameter and pin diameter are important factors in choosing the correct chain width. The width of the chain is the nearest binary fraction of 5/8 of an inch. It should be at least half the thickness of the sprocket, and the plate thickness is one-eighth the width of the chain. Overweight chains are indicated with the suffix H. The pitch and width of the chain are determined by the working load and machine speed.
The outer links of the roller chain are called pin links. These pins are inserted into the bushings of the adjacent roller links. They are held in place by cotter pins. Pin links are usually pressed into the pins of heavy-duty chains. These pins are used to hold the rollers in place. However, these pin chains can reduce the power rating of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a minimum pitch in inches and ultimate strength of 12,500 x pitch in inches. At the same time, the O-ring chain greatly reduces wear due to its lubricating effect. O-ring and X-ring chains contain a lubricant injected by vacuum when riveting the chain together. Transmission chains are tested and governed by standards bodies such as ANSI. In 2011, the American Society of Mechanical Engineers developed a standard for precision power transmission chains.
Roller chain tensile strength
One of the most important indicators of roller chain strength is tensile strength. This measurement refers to the amount of load the chain can withstand before breaking. Another measure, called fatigue strength, refers to the maximum load a chain can withstand before it breaks. The strength of a roller chain depends on its size, the quality of the steel used in its construction, and the heat treatment. There are also differences in the types of shot peening used to treat steel, pitch holes, and link plates.
When choosing a roller chain, the workload is critical. This is the maximum load the chain can withstand before fatigue failure occurs. This measurement is critical because it helps determine the type of load applied to the chain. When deciding which roller chain to buy, be sure to consider the mechanical type and desired strength. Then, make sure it meets strength and load-carrying capacity requirements.
The ultimate tensile strength of a roller chain is based on the manufacturer’s recommended maximum tensile strength. However, the actual tensile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest tension it can withstand before breaking. This value is usually expressed in points.
The maximum tensile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have two layers of steel connected by pins that are nearly twice as strong as standard roller chains.
The tensile strength of a single-strand roller chain is approximately 500 tons. In comparison, a single-chain blockchain has a tensile strength of 900. The tensile strength of the two is similar, and it is not recommended to choose one or the other. Although steel and titanium chains are considered the strongest materials for roller chains, these materials are not magnetic.
editor by Cx 2023-04-26
China best Dog Drive Chain for Transmission System roller chain breaking tool
Product Description
We specialize in the chains made to customers’ drawings and specification. Our advantage is reliable quality, competitive price, prompt delivery and good service.
Standard products include various transmission and conveyor chains, like Roller Chain, double pitch Conveyor Chain, Hollow Pin Chain, Leaf Chain, Table Top Chain, Side Bow Chain, Lumber Chain, Agriculture Chain, Silent Chain, PIV Chain, Stainless Steel Chain, Nickel/ Zinc plated Chain, Dacromet Chain, Engineering Chain, Steel Pintle Chain, Welded steel chain, Forged chain, Malleable Iron chain, and many other types. Different kinds of attachment are available.
Product Description
Specifications:
1) Attachments on 1 side
2) Attachments on inner plates
3) Attachments on outer plates
4) Attachments on both sides
5) Straight attachments
6) Crank attachments
7) Pin attachments
8) Other special attachments
Transmission chain is famous for its high strength and continuous antifatigue; The chain dimensions fully meet the standards of ANSI and BS.
According to varied working conditions, it may choose the chain with different coating treatment, such as zinc plating, nickel plating, chromeplating and dacromet plating ec
Product Description
|
25-1 to 240-1 |
We supply varied kinds of roller chains, conveyor chains, transmission chains and agricultural chains etc. According drawings.
Features:
1) A series chains:
A) Simplex: 25-1 – 240-1
B) Duplex: 25-2 – 240-2
C) Triplex: 25-3 – 240-3
2) B series chains:
A) Simplex: 04B-1 – 72B-1
B) Duplex: 05B-2 – 72B-2
C) Triplex: 05B-3 – 72B-3
3) Materials: Stainless steel or carbon steel
4) Other chains available: Heavy-duty series roller chains, cottered type short pitch precision roller chains (A series), heavy duty series cottered type roller chains, other simplex roller chains, zinc plated chains, dacromet plated chains, nickel plated chains, anti-side bow chains, side bow chains for pushing windows, side bow chains, side bow chains, self-lubrication roller chains, silent chains, self-tooth forming chains (P. I. V. Chains), heavy-duty cranked-link transmission chains, steel chains for sewage disposal, oil field chains, coupling chains, motorcycle chains, O-ring motorcycle chains, engine mechanism chain (timing chains), double pitch transmission chains and double pitch transmission chain attachments.
| Material: | Stainless Steel |
|---|---|
| Structure: | Roller Chain |
| Surface Treatment: | Polishing |
| Chain Size: | 1/2"*11/128" |
| Feature: | Antirust, Anticorrosion |
| Structure(for Chain): | Roller Chain |
buy drive chain
Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.
roller chain
Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.
mute chain
The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.
flat top chain
One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.
double chain
Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.
Self-lubricating chain
Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.
editor by CX 2023-04-20
China Chain Factory of Agricultural Rice Conveyor Roller Chain Transmission Chain and Industrial Conveyor Drive Chain with Attachment X348 X458 X678 wholesaler
Solution Description
About Factory
With far more than 18 years’ histiory, we are a professinal producer for fall forged products this sort of as forged chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and travel chain (X348, X458, X678), and so forth common moulds of chain.
Apart from, we can also generate as for every your drawing or sample, unique hyperlink chain, pusher, pin and plate, according to customers’ distinctive requirements.
Product Description
one) Material: Alloy steel, 40Cr, 42CrMo and so on.
two) Varieties: Regular sorts, X348 X458 X678, and so on. (Or as for every your drawing)
three) Method: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing
Solution Display
Complex Data
| Model | Dimension | Weight (Kg) | Content | Hardness | Functioning Load (KN) | Restrict Load (KN) | ||||||
| P | T | C | S | F | R | D | ||||||
| 10160B | one hundred and one.6 | 24 | 36 | 13 | fourteen | six | 14 | .32 | 20CrMnTi | Surface HRC56-64° Depth .6-1.2mm |
18 | one hundred |
| 10160 | a hundred and one.six | 30 | 36 | 13 | fourteen.five | 9 | fourteen | .36 | 20CrMnTi | Floor HRC56-64° Depth .6-1.2mm | 21.6 | one hundred twenty |
| 14218 | 142 | forty two | 50 | 19 | 20.5 | eleven | 25 | one.fifteen | 20CrMnTi | Surface HRC56-64° Depth .6-1.2mm | forty eight.six | 270 |
| 14226 | 142 | 62 | fifty | 28 | 30 | 15 | 25 | 1.75 | 20CrMnTi | Area HRC56-64° Depth .6-1.2mm | sixty one.two | 340 |
| 2571 | 200 | 66 | 60 | 30 | 32 | eighteen | 30 | two.8 | 20CrMnTi | Area HRC56-64° Depth .6-1.2mm | 72 | four hundred |
| 26014 | 260 | 70 | seventy five | 31 | 33 | twenty | 34 | 5.two | 20CrMnTi | Floor HRC56-64° Depth .6-1.2mm | 135 | 750 |
| 142N | 142 | 43 | 50 | 19 | 22 | twelve.five | twenty five | 1.two | 40Cr | Quench HRC36-44° | 75.6 | 420 |
| 150D | 142 | 42 | 50 | 19 | twenty.5 | eleven | 25 | one.15 | 40Cr | Quench HRC36-44° | 75.6 | 420 |
| MG20 | two hundred | 70 | fifty | 27 | 29 | seventeen | 35 | three.seventy eight | 40Cr | Quench HRC36-44° | one hundred forty four | 800 |
| MG20B | two hundred | 70 | fifty | 27 | 29 | 17 | 30 | three.82 | 40Cr | Quench HRC36-44° | a hundred and forty.four | 780 |
| MG20C | 200 | 70 | 50 | 27 | 29 | 17 | 28 | three.85 | 40Cr | Quench HRC36-44° | 122.4 | 680 |
| MS32 | two hundred | 42 | 50 | twenty | 22 | 12 | twenty five | one.four | 40Cr | Quench HRC36-44° | 75.six | 420 |
| MS55 | 200 | eighty | 70 | 35 | 38 | twenty five | 28 | 4.36 | 40Cr | Quench HRC36-44° | 138.six | 770 |
| 3006 | 200 | 65 | 70 | thirty | 33 | 24 | 32 | three.6 | 40Cr | Quench HRC36-44° | a hundred and sixty.two | 890 |
| MS63 | 250 | 70 | 80 | 30 | 33 | twenty | 32 | four.93 | 40Cr | Quench HRC36-44° | 147.six | 820 |
| S16 | 100 | 30 | 27 | 15 | sixteen | 8 | 14 | .3 | 40Cr | Quench HRC36-44° | 16 | 88 |
| S20 | 125 | 34 | 33 | seventeen | eighteen | eight | 17 | .37 | 40Cr | Quench HRC36-44° | 19.4 | 108 |
| S25 | a hundred and sixty | forty eight | 39 | 23 | 25 | thirteen | 20 | 1.28 | 40Cr | Quench HRC36-44° | fifty five.eight | 310 |
| S30 | 142 | 46 | forty nine | 22 | 23.5 | fourteen | 25 | 1.3 | 40Cr | Quench HRC36-44° | 91.8 | 510 |
| Z16 | a hundred | 40 | 35 | eighteen | twenty | twelve | 17 | .four | 40Cr | Quench HRC36-44° | 32.4 | one hundred eighty |
| Z20 | 125 | fifty | 46 | 24 | 26 | fifteen | 20 | .sixty seven | 40Cr | Quench HRC36-44° | 59.four | 330 |
| Z20D | one hundred twenty five | 52 | sixty | 24 | 26 | sixteen | 26 | 1.15 | 40Cr | Quench HRC36-44° | 82.eight | 460 |
| Z25 | one hundred sixty | 58 | fifty five | 28 | 30 | 18 | twenty five | two.twenty five | 40Cr | Quench HRC36-44° | 82.eight | 460 |
| Z25D | a hundred and sixty | 66 | sixty four | 29 | 31 | 22 | 28 | two.6 | 40Cr | Quench HRC36-44° | 120.6 | 670 |
| Z30 | 142 | 64 | 50 | 29 | thirty.five | eighteen | twenty five | one.8 | 40Cr | Quench HRC36-44° | 111.6 | 620 |
Goods & Testing Equipments
Goods Software
Packing & Supply
Why Decide on Us?
one. We are engaged in chain business more than fifteen years with abundant market place knowledge. We hold enhancing production methods. All the merchandise have more time operating daily life and have handed the industry check.
two. We can design the appropriate chains with substantial good quality material, great abrasion resistance, very good corrosion, high improve and etc as for each your ask for or the chain software.
three. We are the chain producer you can right acquire the item from us with reduced cost and large good quality.
4. We have a professional team for international trade, they have considerable ordeals and are constantly prepared to remedy problems for clients. So you have absolutely nothing to worry about.
five. We have the lengthy-expression cooperative forwarder who can give us the least expensive freight. And it can help you to save the freight. What is more, for the FCL, we will style the offers as for every the container dimensions with the premier capacity to preserve the shipping value for the two of us.
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly |
| Surface Treatment: | Polishing |
| Structure: | Combined Chain |
| Material: | Alloy |
| Type: | Cranked Link Chain |
###
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | Dimension | Weight (Kg) | Material | Hardness | Working Load (KN) | Limit Load (KN) | ||||||
| P | T | C | S | F | R | D | ||||||
| 10160B | 101.6 | 24 | 36 | 13 | 14 | 6 | 14 | 0.32 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm |
18 | 100 |
| 10160 | 101.6 | 30 | 36 | 13 | 14.5 | 9 | 14 | 0.36 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 21.6 | 120 |
| 14218 | 142 | 42 | 50 | 19 | 20.5 | 11 | 25 | 1.15 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 48.6 | 270 |
| 14226 | 142 | 62 | 50 | 28 | 30 | 15 | 25 | 1.75 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 61.2 | 340 |
| 20028 | 200 | 66 | 60 | 30 | 32 | 18 | 30 | 2.8 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 72 | 400 |
| 26014 | 260 | 70 | 75 | 31 | 33 | 20 | 34 | 5.2 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 135 | 750 |
| 142N | 142 | 43 | 50 | 19 | 22 | 12.5 | 25 | 1.2 | 40Cr | Quench HRC36-44° | 75.6 | 420 |
| 150D | 142 | 42 | 50 | 19 | 20.5 | 11 | 25 | 1.15 | 40Cr | Quench HRC36-44° | 75.6 | 420 |
| MG20 | 200 | 70 | 50 | 27 | 29 | 17 | 35 | 3.78 | 40Cr | Quench HRC36-44° | 144 | 800 |
| MG20B | 200 | 70 | 50 | 27 | 29 | 17 | 30 | 3.82 | 40Cr | Quench HRC36-44° | 140.4 | 780 |
| MG20C | 200 | 70 | 50 | 27 | 29 | 17 | 28 | 3.85 | 40Cr | Quench HRC36-44° | 122.4 | 680 |
| MS32 | 200 | 42 | 50 | 20 | 22 | 12 | 25 | 1.4 | 40Cr | Quench HRC36-44° | 75.6 | 420 |
| MS55 | 200 | 80 | 70 | 35 | 38 | 25 | 28 | 4.36 | 40Cr | Quench HRC36-44° | 138.6 | 770 |
| 3006 | 200 | 65 | 70 | 30 | 33 | 24 | 32 | 3.6 | 40Cr | Quench HRC36-44° | 160.2 | 890 |
| MS63 | 250 | 70 | 80 | 30 | 33 | 20 | 32 | 4.93 | 40Cr | Quench HRC36-44° | 147.6 | 820 |
| S16 | 100 | 30 | 27 | 15 | 16 | 8 | 14 | 0.3 | 40Cr | Quench HRC36-44° | 16 | 88 |
| S20 | 125 | 34 | 33 | 17 | 18 | 8 | 17 | 0.37 | 40Cr | Quench HRC36-44° | 19.4 | 108 |
| S25 | 160 | 48 | 39 | 23 | 25 | 13 | 20 | 1.28 | 40Cr | Quench HRC36-44° | 55.8 | 310 |
| S30 | 142 | 46 | 49 | 22 | 23.5 | 14 | 25 | 1.3 | 40Cr | Quench HRC36-44° | 91.8 | 510 |
| Z16 | 100 | 40 | 35 | 18 | 20 | 12 | 17 | 0.4 | 40Cr | Quench HRC36-44° | 32.4 | 180 |
| Z20 | 125 | 50 | 46 | 24 | 26 | 15 | 20 | 0.67 | 40Cr | Quench HRC36-44° | 59.4 | 330 |
| Z20D | 125 | 52 | 60 | 24 | 26 | 16 | 26 | 1.15 | 40Cr | Quench HRC36-44° | 82.8 | 460 |
| Z25 | 160 | 58 | 55 | 28 | 30 | 18 | 25 | 2.25 | 40Cr | Quench HRC36-44° | 82.8 | 460 |
| Z25D | 160 | 66 | 64 | 29 | 31 | 22 | 28 | 2.6 | 40Cr | Quench HRC36-44° | 120.6 | 670 |
| Z30 | 142 | 64 | 50 | 29 | 30.5 | 18 | 25 | 1.8 | 40Cr | Quench HRC36-44° | 111.6 | 620 |
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly |
| Surface Treatment: | Polishing |
| Structure: | Combined Chain |
| Material: | Alloy |
| Type: | Cranked Link Chain |
###
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | Dimension | Weight (Kg) | Material | Hardness | Working Load (KN) | Limit Load (KN) | ||||||
| P | T | C | S | F | R | D | ||||||
| 10160B | 101.6 | 24 | 36 | 13 | 14 | 6 | 14 | 0.32 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm |
18 | 100 |
| 10160 | 101.6 | 30 | 36 | 13 | 14.5 | 9 | 14 | 0.36 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 21.6 | 120 |
| 14218 | 142 | 42 | 50 | 19 | 20.5 | 11 | 25 | 1.15 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 48.6 | 270 |
| 14226 | 142 | 62 | 50 | 28 | 30 | 15 | 25 | 1.75 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 61.2 | 340 |
| 20028 | 200 | 66 | 60 | 30 | 32 | 18 | 30 | 2.8 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 72 | 400 |
| 26014 | 260 | 70 | 75 | 31 | 33 | 20 | 34 | 5.2 | 20CrMnTi | Surface HRC56-64° Depth 0.6-1.2mm | 135 | 750 |
| 142N | 142 | 43 | 50 | 19 | 22 | 12.5 | 25 | 1.2 | 40Cr | Quench HRC36-44° | 75.6 | 420 |
| 150D | 142 | 42 | 50 | 19 | 20.5 | 11 | 25 | 1.15 | 40Cr | Quench HRC36-44° | 75.6 | 420 |
| MG20 | 200 | 70 | 50 | 27 | 29 | 17 | 35 | 3.78 | 40Cr | Quench HRC36-44° | 144 | 800 |
| MG20B | 200 | 70 | 50 | 27 | 29 | 17 | 30 | 3.82 | 40Cr | Quench HRC36-44° | 140.4 | 780 |
| MG20C | 200 | 70 | 50 | 27 | 29 | 17 | 28 | 3.85 | 40Cr | Quench HRC36-44° | 122.4 | 680 |
| MS32 | 200 | 42 | 50 | 20 | 22 | 12 | 25 | 1.4 | 40Cr | Quench HRC36-44° | 75.6 | 420 |
| MS55 | 200 | 80 | 70 | 35 | 38 | 25 | 28 | 4.36 | 40Cr | Quench HRC36-44° | 138.6 | 770 |
| 3006 | 200 | 65 | 70 | 30 | 33 | 24 | 32 | 3.6 | 40Cr | Quench HRC36-44° | 160.2 | 890 |
| MS63 | 250 | 70 | 80 | 30 | 33 | 20 | 32 | 4.93 | 40Cr | Quench HRC36-44° | 147.6 | 820 |
| S16 | 100 | 30 | 27 | 15 | 16 | 8 | 14 | 0.3 | 40Cr | Quench HRC36-44° | 16 | 88 |
| S20 | 125 | 34 | 33 | 17 | 18 | 8 | 17 | 0.37 | 40Cr | Quench HRC36-44° | 19.4 | 108 |
| S25 | 160 | 48 | 39 | 23 | 25 | 13 | 20 | 1.28 | 40Cr | Quench HRC36-44° | 55.8 | 310 |
| S30 | 142 | 46 | 49 | 22 | 23.5 | 14 | 25 | 1.3 | 40Cr | Quench HRC36-44° | 91.8 | 510 |
| Z16 | 100 | 40 | 35 | 18 | 20 | 12 | 17 | 0.4 | 40Cr | Quench HRC36-44° | 32.4 | 180 |
| Z20 | 125 | 50 | 46 | 24 | 26 | 15 | 20 | 0.67 | 40Cr | Quench HRC36-44° | 59.4 | 330 |
| Z20D | 125 | 52 | 60 | 24 | 26 | 16 | 26 | 1.15 | 40Cr | Quench HRC36-44° | 82.8 | 460 |
| Z25 | 160 | 58 | 55 | 28 | 30 | 18 | 25 | 2.25 | 40Cr | Quench HRC36-44° | 82.8 | 460 |
| Z25D | 160 | 66 | 64 | 29 | 31 | 22 | 28 | 2.6 | 40Cr | Quench HRC36-44° | 120.6 | 670 |
| Z30 | 142 | 64 | 50 | 29 | 30.5 | 18 | 25 | 1.8 | 40Cr | Quench HRC36-44° | 111.6 | 620 |
What is a drive chain?
A drive chain is a wheeled device that transmits power from one gear to another. The drive chain is usually an oval ring around a corner or worm gear. On the other hand, idler pulleys do not transmit power and are not used to move the chain. In some cases, drive chains can be used with idler pulleys to transport objects. This allows the drive chain to recover some power from the second gear.
conveyor chain
There are many types of conveyor chains to choose from. One type is a closed joint chain. It consists of the barrel and connecting rod, made from a single casting and heat-treated for high strength and durability. Conveyor chains typically have low running speeds and are typically made of malleable iron. Another type of chain is the power transmission chain, which is used to transmit mechanical power. They feature efficient lubrication and are stronger than conventional conveyor chains.
Roller chain pitches can range from half an inch to a third of an inch. They are available in steel and nickel-plated steel. They can be used with inline or staggered rollers and can be designed with different pitch levels. They can also have bushings between the chainplates or gaps between the teeth to increase their maximum spacing. When choosing a conveyor chain, remember to properly lubricate bearing surfaces to minimize power absorption, wear, and corrosion. Mineral oils of medium viscosity are suitable for normal operating temperatures. SAE 20W50 is suitable. Manufacturers also offer self-lubricating chains.
Conveyor chains are used in many industries. The automotive industry has traditionally used these chains for bulk transport. Their reliability and low cost make them an excellent choice for a variety of applications. CZPT Chains offers stainless steel and CZPT conveyor chains to meet your unique requirements. If you’re in the market for a new conveyor, don’t forget to shop around. CZPT Chain can help you find the perfect one.
The regular drive version consists of an ASME/ANSI roller chain wrapped around a driven sprocket. It can also be configured for variable rpm. The gear ratio between the two parts determines the reduction or increase in speed. In some cases, solution chains can be used. Roller chains are more efficient. Then, there are solutions for both cases. There are many types of conveyor chains to choose from.
Conveyor chain pitch also plays an important role in performance. The smaller the pitch of the chain, the faster it spins. On the other hand, a smaller pitch will require more teeth on the sprocket, which means more links will be engaged during the movement. This smaller articulation angle also produces smoother motion. It also reduces vibration. Therefore, CZPT Chains can be trusted for a long time.
roller chain
The performance of a drive chain depends on how well it is maintained and lubricated. Careful attention to detail is required when selecting a roller chain, which is one of the most important components in a drive chain. Its proper lubrication and assembly will significantly affect its wear life. Here are some important tips to follow when buying a roller chain:
The size of the drive chain should be selected according to the sprockets used. The large sprocket should have at least 25 teeth, and the small sprocket should have fewer teeth. The pitch of a drive chain is the contact angle between the chain and the sprocket. The smaller the sprocket, the smaller the contact angle of the two parts. Larger sprockets are better, but smaller sprockets must never have fewer teeth.
When purchasing a roller chain, be sure to consider the maximum speed of the small sprocket. This will determine how much lubrication you need. Different lubrication systems have different requirements. Manual lubrication limits how many feet per minute the drive chain can run, while oil bath lubrication can get you up to 1100 ft/min. The only way to maximize drive chain speed is to purchase a pump lubrication system.
Once you have the right length, you can determine if you need a new one. To do this you have to move the axis to measure the length. Once the length is determined, the drive chain should be removed from the sprocket and measured using the ANSI specified measuring load. You should also follow safety guidelines when measuring your chain. If you want to maximize the life of your drive chain, be sure to follow these tips.
Another important consideration is the type of environment you operate in. For applications that need to avoid rubbing steel rails, it is best to use a roller chain that can withstand a clean indoor environment. Although roller chains are generally more durable, they must be stored properly to avoid corrosion. If you care about the environment, consider opting for double chain. Its durability and low maintenance costs will make it a valuable investment in your business.
closed pivot
Closed-end pivot drive chains are used in a variety of applications. They are known for their durability, high strength, and long life. They are available in a variety of grades, including grade 400, grade 600, and grade 800 pivots, which can withstand the high forces required for certain applications. Enclosed pivot chains can be used to lift, pull, convey and transfer heavy loads.
Class 400 closed-end pivot chain features one-piece cast offset link construction. Steel pins connect each link and are prevented from rotating by head stops. This design allows the pin to connect inside the barrel without breaking. This type of chain is the most commonly used and has the highest durability. In addition to being extremely durable, it offers long-lasting performance and smooth operation.
Another closed-end pivot conveyor chain drive is called a power drive chain. These chains consist of barrels and links used to transmit rotation from one shaft to another. The barrels of the closed-end pivot chains are made of steel, which allows them to run easily on the sprockets. Block drive chains are used for low-speed applications, but they can be noisy when the chain is in contact with the sprockets.
The enclosed pivot drive chain has rollers on both ends to minimize wear. These chains are usually made of steel and can be used in areas where high-speed power transmission is required. They are also available in heavy-duty versions. Unlike other types of chains, steel pivot chains are designed for a variety of applications. They are suitable for heavy-duty applications and their open barrel design allows for minimal contact with the pins in the barrel and the root of the sprocket.
Linear chain
CZPT is an important part of linear drive technology. This type of chain is capable of delivering real power in tight spaces. Typically, loads are moved by pulling or pushing. CZPT can perform both types of movements. They can push and pull additional loads. This type of chain can also be wound and stored in the magazine. It is a popular choice for small machine tools and many other uses.
Unlike traditional mechanical chains, CZPT uses a push-pull strategy to move heavy objects. It is a rigid locking design that prevents kinking and allows the chain to transmit force without bending. The CZPT is an excellent choice for moving large loads and is particularly versatile in power transmission. However, CZPT is more expensive than traditional drive chain options.
The service life of a linear chain depends on its design, material type and size. You may want to buy a good quality chain, but it’s not necessary in all cases. While superior quality can extend the life of the chain, it may not be necessary for low-speed drives or very light shock loads. If you’re not dealing with high-velocity shock loads, you probably don’t need features like oil reservoirs or bushing grooves.
The size of the drive sprocket can have a major impact on the overall life of the linear chain. It determines how fast the chain can go and how much horsepower it can produce. An 11-tooth chain will hit about half its rated speed, but only about 30 percent of its rated horsepower. You can extend the life of your linear chain by choosing a drive sprocket with a higher number of teeth. It is best to choose a drive sprocket with a high number of teeth, but make sure the number of teeth is even. This will ensure that your chain wear is evenly distributed.
editor by czh 2022-12-20
Elevator Drive Engineer Conveyor Chain
INTRODUCTION
4037 with G6 Attachment CZPT Chain
The offset hyperlink chain is made with higher abrasion, impact, and corrosion resistance to meet the application
demands in sugar making market. Its aspect plates are bended but with paralleled finishes. Each very hot bending and
cold bending strategies can be utilized for aspect plate processing. The adoption of advanced bending die,
coupled with increased quality inspection, helps make sure the bending of facet plates arrives CZPT cracks.
For that reason, the offset sidebar chain will not likely break easily beneath weighty load conditions.
Created employing stainless steel and alloy metal resources, our offset hyperlink chain for sugar industry provides minimal
tensile energy alternatives among 250 and 900KN, and rated functioning load alternatives from18 to 85KN.
DC 2184 DC 8184 DC C2614 DC 0571 three all avaliable
| Chain No. | Pitch P (mm) | Internal width of slender finish b1 (min.) (mm) | Outer diameter of roller (bushing) D (max.) (mm) | Pin | Sidebar | Min. tensile power Q (min) (KN) | Rated operating load (KN) | Excess weight per meter q (kg/m) | |||
| d (mm) | L1 (mm) | L2 (mm) | h (mm) | T (mm) | |||||||
| *#SS100D | a hundred | 33.27 | 33.27 | seventeen.27 | 38.4 | 48.six | forty four.5 | 8 | two hundred | 17.eight | ten.forty seven |
| DC 1125 | one zero one.6 | 32.six | 50.8 | seventeen.five | 37.9 | 45 | 50.eight | seven.nine | 210 | 18.26 | |
| *DC D2184 | 152.4 | 34.nine | seventy six.two | 22.23 | 43.nine | fifty one.two | 50.8 | 9.5 | 355.6 | 31.six | seventeen.seven |
| DC W1796 | 152.four | 37.8 | 69.85 | 22.23 | 44.2 | fifty two.9 | fifty seven.two | 9.five | 444.five | 31.six | eighteen.59 |
| DC 0571 3 | 152.4 | 38 | 76.2 | 23.eighty three | 47.1 | 54.9 | sixty.3 | ten.three | 622.3 | 36.1 | 21.83 |
| DC 8184 | 203.2 | 45.9 | 88.nine | twenty five.four | 59.seven | 65.8 | 69.nine | twelve.7 | 742.4 | 47.6 | 29.2 |
| DC C2614 | 304.8 | sixty nine.85 | sixty three.five | 31.seventy five | 78.five | 84.5 | 88.nine | fifteen.nine | 1000 | 84.five | 33.68 |
China Roller chain and sprocket manufacturer Small drive chain in Houston United States Roller Type Chain – C2040 with ce certificate top quality low price
We – EPG Team the greatest Chain and agricultural gearbox factory in China with 5 various branches.
Getting accrued cherished knowledge in cooperating with overseas clients, a specialized provider of a complete variety of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….We Our organization pays particular interest to customers’ needs, listening to the particular needs of each consumer and guaranteeing complete satisfaction.search ahead to the possibility to serve you and hope to insert you to our growing family members of satisfied clients. No other variety of chains can defeat EPG for range. In addition to typical roller chains of all kinds and dimensions, roller chains with attachments and double pitch roller chains, we also supply particular chains such as grip chains, accumulation chains, elastomeric profile chains, leaf chains, bushed conveyor chains, hollow pin chains and numerous other designs. Servicing-free or corrosion-evidence chains are accessible for specific applications. Our pin oven chains and tube conveyor chains enable a vast variety of remedies for the effective generation and ideal conveying of cans and tubes. Find out more about our item SMA EPT ROLLER Variety CHAIN – C2040
A. Our Services:
one. Any of your type inquiry about chain would be replied within 24 hours.
two. Effectively-qualified and seasoned product sales staffs will reply all your considerations in fluent English.
3. OEM services are accessible with us, our skilled designer would make your private notion into being.
4. Protection of your income location, ideas of design and all your private info.
5. Supply by air mail or ship for your orders.
6. With many years of manufacture and advertising expertise in worldwide marketplace, brings you profit and fantastic success!
B.Product Description:
C.Business display & Solution Procedure
D. Packaging
| Packaging Information: | Chain+Plastic Bag+ EPT Box+Wood situation+Huge Carton+Steel Pallets |
| Shipping and delivery Element: | 5 months |
E. FAQ:
one. Are you manufacturer or trade Organization?
We are a factory launched in 1991 with trade group for global services.
2. What conditions of payment you typically use?
T/T thirty% deposit and 70% once more EPT document, Western Union, L/C at sight
three. what is your guide time for your products?
Usually forty five days soon after verified get. thirty times could be accessible in minimal time for some objects (during May possibly to July), and 65 days throughout new 12 months and scorching season ( Jan to March).
4. Do you attend any Demonstrate?
We go to Hannover present in Germany, N EPT in Austrilia, Canton reasonable, PTC, in China and many EPT unique furniture exhibits.
five. Do you have any instantaneous chat ?
The use of first gear manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the outlined substitute parts contained herein are not sponsored, approved, or created by the OEM.
China Roller chain and sprocket manufacturer Industrial chainsaw chain drive link chart in San Francisco United States 120 Standard Transmission Roller Chain with ce certificate top quality low price
We – EPG Team the greatest Chain and agricultural gearbox manufacturing facility in China with 5 various branches.
focus in electricity transmission products Chain,pto shaft, agricultural gearboxes , CATV items, mechanical seal, hydraulic and Pheumatic, and marketing merchandise.Company Each and every approach, each and every part, every single perform in EPG is demanded to be accomplished one phase pursuing yet another, cautiously and cautiously, from material assortment, reformation to producing equipment, from elements heat remedy to computerized assembly, from good quality control to solution inspection and screening and from purchase working to after revenue service.& distributor of roller & wire rope stop chains. Types of chains include alloy, high tensile transportation, large examination & proof coil chains. Purposes contain log chains, cargo lashings, pipe line handing, tailgates, guard rails & switch chains. Normal solitary-strand roller chain, standardized by ASME, is an assembly of alternating pin backlinks and roller hyperlinks. The distance among pin centers is called the pitch. The pitch is what categorizes the size of the chain. The more substantial the pitch, the higher the load ranking. Chains with modest pitches carry smaller sized loads, function more quietly, and at larger speeds. Multi-strand, tiny-pitch roller chains are a good answer for substantial-load, high-velocity programs.
ZHangZhoug EPT Chain Co.,Ltd. As the specialistTiming chain company . EPT Chain would like to make very suitable solutions to all the valued customers at home and abroad.”
Our firm owns much more than a hundred sets of innovative and skilled manufacturing equipments, EPT and arduous QC method is implemented in every single approach from materials acquiring to finished products packaging. Also, we have passed the ISO9001: 2015 Quality Administration Technique Certification.
We think “High quality is the daily life of the organization,Shipping is the guarantee to the custmoers”.And we sincerely hopes to build earn-win organization with abroad and domestic customers
| ANSI No | Pitch | Plate Structure | Plate Specifics | Pin Detials | Tensile Power | Typical Tensile Strength | Gross Fat | ||
| Thickness | Width | diameter | Length | ||||||
| P(mm) | T(mm) | W(mm) | mm | L(mm) | Kn | Kn | kg/m | ||
| AL322 | 9.53 | 2×2 | 1.30 | seven.70 | 3.fifty eight | 6.eighty | 9.00 | ten.20 | .23 |
| AL344 | nine.53 | 4×4 | one.30 | 7.70 | 3.fifty eight | 11.sixty | 18.00 | twenty.00 | .forty six |
| AL422 | twelve.70 | 2×2 | 1.50 | ten.40 | three.ninety six | eight.30 | 14.ten | sixteen.90 | .39 |
| AL444 | 12.70 | 4×4 | 1.50 | ten.40 | three.ninety six | 14.forty | 28.twenty | 35.20 | .seventy four |
| AL466 | 12.70 | 6×6 | one.fifty | ten.40 | 3.96 | twenty.50 | forty two.thirty | 52.70 | 1.thirteen |
| AL522 | fifteen.88 | 2×2 | two.00 | twelve.eighty | 5.80 | eleven.05 | 22.00 | 27.fifty | .64 |
| AL534 | fifteen.88 | 3×4 | 2.00 | twelve.80 | 5.80 | seventeen.00 | 33.00 | forty six.00 | one.ten |
| AL544 | fifteen.88 | 4×4 | 2.00 | 12.eighty | five.80 | 19.forty | forty four.00 | 55.00 | one.25 |
| AL566 | 15.88 | 6×6 | two.00 | 12.80 | 5.80 | 27.fifty | sixty six.00 | 82.fifty | 1.seventy nine |
| AL622 | 19.05 | 2×2 | 2.forty | 15.60 | 5.94 | thirteen.00 | 37.00 | 44.forty | .86 |
| AL644 | 19.05 | 4×4 | 2.40 | fifteen.sixty | five.94 | 22.70 | 63.70 | 78.eighty | one.76 |
| AL666 | 19.05 | 6×6 | 2.forty | 15.sixty | 5.ninety four | 32.twenty | one hundred.ten | 118.60 | 2.sixty |
| AL688 | 19.05 | 8×8 | two.forty | fifteen.sixty | five.ninety four | forty two.20 | 133.forty | 156.60 | 3.49 |
| AL822 | twenty five.40 | 2×2 | 3.20 | 20.50 | 7.ninety two | 16.00 | 56.70 | sixty eight.sixty | one.fifty four |
| AL844 | twenty five.40 | 4×4 | three.20 | 20.fifty | 7.92 | 29.forty | 113.forty | one hundred thirty five.60 | 3.00 |
| AL866 | 25.forty | 6×6 | 3.twenty | 20.50 | 7.ninety two | 44.twenty | a hundred and seventy.00 | 202.thirty | four.forty six |
| AL1571 | 31.seventy five | 2×2 | four.00 | 25.sixty | 9.fifty three | 19.60 | 88.50 | 107.ten | two.37 |
| AL1044 | 31.75 | 4×4 | four.00 | twenty five.60 | 9.fifty three | 36.40 | 177.00 | 203.60 | 4.sixty eight |
| AL1066 | 31.seventy five | 6×6 | 4.00 | 25.60 | 9.fifty three | fifty two.thirty | 265.00 | 315.30 | seven.twenty |
| AL1088 | 31.75 | 8×8 | 4.00 | twenty five.sixty | nine.53 | sixty eight.fifty | 354.00 | 421.20 | nine.ninety four |
| AL1222 | 38.ten | 2×2 | four.eighty | 30.50 | 11.10 | 24.thirty | 127.00 | 151.10 | three.sixty five |
| AL1244 | 38.ten | 4×4 | four.eighty | 30.50 | 11.ten | 43.80 | 254.00 | 299.70 | seven.05 |
| AL1266 | 38.ten | 6×6 | 4.80 | 30.fifty | 11.ten | 63.20 | 381.00 | 426.30 | ten.fifty |
| AL1288 | 38.10 | 8×8 | four.80 | 30.fifty | eleven.ten | 82.sixty | 508.00 | 568.40 | 14.03 |
| AL1444 | forty four.forty five | 4×4 | five.60 | 36.forty | 12.sixty four | fifty one.30 | 372.70 | 413.sixty | ten.34 |
| AL1466 | forty four.45 | 6×6 | 5.sixty | 36.40 | twelve.sixty four | seventy four.56 | 559.00 | 620.40 | 15.sixteen |
| AL1644 | 50.eighty | 4×4 | 6.forty | forty one.60 | 14.21 | fifty eight.00 | 471.00 | 522.80 | 12.98 |
| AL1666 | fifty.eighty | 6×6 | six.forty | forty one.60 | fourteen.21 | eighty three.80 | 706.00 | 783.60 | 19.seventy six |
| AL1688 | 50.eighty | 8×8 | 6.forty | 41.60 | fourteen.21 | 109.50 | 942.00 | 1045.50 | 25.47 |
| ISO Chain No. | ANSI No | Pitch | Plate Framework | Plate Details | Pin Detials | Tensile Energy | Regular Tensile Toughness | Gross Excess weight | ||
| Thickness | Width | diameter | Length | |||||||
| P(mm) | T(mm) | W(mm) | mm | L(mm) | Kn | Kn | kg/m | |||
| LH0822 | BL422 | twelve.70 | 2×2 | two.00 | 12.07 | 5.09 | 11.05 | 22.20 | 27.76 | .sixty eight |
| LH0823 | BL423 | 12.70 | 2×3 | 2.00 | twelve.07 | 5.09 | thirteen.16 | 22.twenty | 27.seventy six | .eighty four |
| LH571 | BL434 | 12.70 | 3×4 | two.00 | twelve.07 | 5.09 | seventeen.40 | 33.40 | 41.40 | 1.13 |
| LH0844 | BL444 | 12.70 | 4×4 | two.00 | 12.07 | five.09 | 19.fifty one | 44.50 | fifty six.00 | 1.28 |
| LH0846 | BL446 | twelve.70 | 4×6 | 2.00 | 12.07 | 5.09 | 23.seventy five | forty four.fifty | fifty six.00 | one.sixty five |
| LH0866 | BL466 | 12.70 | 6×6 | 2.00 | twelve.07 | five.09 | 27.99 | 66.70 | 81.70 | 1.96 |
| LH0888 | BL488 | twelve.70 | 8×8 | two.00 | twelve.07 | 5.09 | 36.45 | 89.00 | 109.40 | 2.61 |
| LH1571 | BL522 | fifteen.88 | 2×2 | 2.forty | 15.09 | five.96 | 12.ninety | 33.40 | 43.ten | one.07 |
| LH1571 | BL523 | 15.88 | 2×3 | two.40 | 15.09 | 5.ninety six | fifteen.37 | 33.40 | 43.10 | 1.27 |
| LH1034 | BL534 | fifteen.88 | 3×4 | two.forty | fifteen.09 | five.96 | twenty.32 | forty eight.ninety | sixty five.sixty | 1.sixty nine |
| LH1044 | BL544 | fifteen.88 | 4×4 | two.40 | fifteen.09 | 5.ninety six | 22.78 | 66.70 | 84.fifty | one.89 |
| LH1046 | BL546 | 15.88 | 4×6 | 2.40 | 15.09 | five.ninety six | 27.74 | sixty six.70 | 84.fifty | two.40 |
| LH1066 | BL566 | fifteen.88 | 6×6 | two.40 | fifteen.09 | 5.ninety six | 32.eighteen | 100.10 | a hundred twenty five.ten | two.eighty |
| LH1088 | BL588 | 15.88 | 8×8 | 2.40 | 15.09 | five.ninety six | 42.57 | 133.40 | 169.fifty | 3.72 |
| LH1222 | BL622 | 19.05 | 2×2 | three.twenty | eighteen.eleven | 7.94 | seventeen.37 | 48.90 | 63.sixty | 1.sixty eight |
| LH1223 | BL623 | 19.05 | 2×3 | three.20 | eighteen.eleven | seven.ninety four | 20.73 | forty eight.90 | sixty three.60 | two.04 |
| LH1234 | BL634 | 19.05 | 3×4 | three.twenty | 18.11 | 7.94 | 27.forty three | 75.60 | 102.80 | two.83 |
| LH1244 | BL644 | 19.05 | 4×4 | 3.20 | eighteen.11 | 7.94 | 30.78 | 97.ninety | 120.ninety | three.eighteen |
| LH1246 | BL646 | 19.05 | 4×6 | three.twenty | 18.11 | seven.ninety four | 37.49 | 97.90 | 120.ninety | four.01 |
| LH1266 | BL666 | 19.05 | 6×6 | 3.20 | 18.11 | 7.ninety four | 44.twenty | 146.eighty | one hundred ninety.eighty | 4.73 |
| LH1288 | BL688 | 19.05 | 8×8 | 3.twenty | eighteen.eleven | seven.94 | 57.sixty one | 195.70 | 238.80 | 6.29 |
EPT Chain has established up a complete set of top quality management program which is offered with sophisticated inspection and te EPT tools. EPT has been effectively certified by ISO9002 High quality Management Technique, ISO9001 High quality Administration Method, API certification, ISO/TS16949:2002 and ISO10012 measurement management technique. Full use has been produced of all types of innovative tactics and technology to attain excelsior production.
Fantastic attention has been paid on environmental defense and energy saving. The solution properly displays environmental defense and strength saving. In 2015, EPT took the direct in attaining ISO14001 setting administration certificate and thereafter passed the inspection of cleanse production and recycling economic system, winning the title of “ZHangZhoug Environmentally friendly Business”.
“We are constantly serving our clients with our be EPT items.” EPT will constantly adhere to it enterprise spirit of becoming functional, modern, successful and excellent to make the prime intercontinental chain push.
Mandy
CEO.
ZHangZhoug EPT Chain Co.,Ltd.
Deal with: #8th Shangbo Highway,HangZhou Industrial zone,ZHangZhoug,China
The use of unique equipment manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our company and the outlined substitution elements contained herein are not sponsored, accepted, or created by the OEM.