Product Description
| Conveyor chain | 78PF1 conveyor chains |
We supply good quality 78PF1 conveyor chains,all the kinds which you need, any demand pls contact us!
| Usage: | Conveyor Chain |
|---|---|
| Material: | Carbon Steel/Iron |
| Surface Treatment: | Shot Peening |
| Feature: | Heat Resistant |
| Chain Size: | According to Your Demand |
| Structure: | Roller Chain |
| Customization: |
Available
| Customized Request |
|---|
What is a roller chain?
What is a roller chain? A roller chain is a transmission system that transmits power from one shaft to another. Internal lubricant helps chains last longer and are interchangeable. Chains are usually made of carbon or alloy steel. Stainless steel is sometimes used in food processing machinery or in environments where lubrication is problematic. Brass and nylon are also sometimes used. If you need to slow down the machine, nylon chains can be used.
Roller chains are used to transmit power from one shaft to another
Generally speaking, the life of a roller chain is limited by three main factors: wear, corrosion, and fatigue. These can be minimized by following some simple guidelines. For optimum performance, the roller chain must be lubricated. Proper lubrication reduces friction and extends product life. Remember that corrosion and wind resistance can adversely affect lubrication, so protect the product properly.
A chain is a mechanical device used to transmit power from one shaft to another. The chain consists of a series of steel plates called bushings. Bushings are attached to the roller chain by pins or bushings. The block and bushing are held together by pins or bushings C riveted to the outer link D. The chain is also attached to the sprocket and bucket by pins or hooks. Chain pitch is measured between hinge centers, usually denoted p.
There are three types of chains: single-strand standard series, multi-strand standard series, and silent chain. Single strand chains are the most common type and cover a wide range of drive loads. Multi-strand chains provide greater power capacity without increasing chain pitch or line speed. An inverted tooth chain is a variant of a single-strand chain that eliminates the noise caused by pitch-related friction.
The inner and outer plates of the roller chain drive are made of steel. The rollers are positioned evenly between the chain links and are fastened to the sprockets. In addition, the rollers can rotate freely within the bushing. The chain links are arc-shaped and mesh with the sprocket teeth to transmit power through the chain.
Chain drives are another common way of transmitting mechanical power. These are the simplest forms of power transmission and are used on conveyor belts and other low-speed applications. The chain wraps around the sprocket and passes through the sprocket whose teeth mesh with the links. This mechanism transfers mechanical power from one shaft to another, increasing speed.
They are interchangeable
There are many different types of roller chains, but most are made of steel. Although they have their own advantages and features, they are generally interchangeable. You can buy different kinds of roller chains from domestic and foreign manufacturers, and you can choose the one that best suits your needs. Bearing Services can help you choose the right bearing for your application needs and budget. Here are some important things to consider before buying a roller chain. Here are some tips to make it easier for you to buy the right type of chain.
When choosing the right roller chain, be sure to consult the available size charts. Depends on how much chain you need to move the load you need to move. Remember that roller chains can be manufactured to fit a variety of machines and must meet your specific needs. Also, the chain should be long enough for the machine you are using. Make sure to buy a chain made of high-quality materials.
Double pitch roller chains have a flat top surface and are used in many different conveying applications. Double-pitch load-carrying roller chains, also known as oversized roller double-pitch chains, have rollers that extend beyond the sidebars to carry products. Double pitch drive series roller chains are used in elevators, long conveyor drives, agricultural machinery, and commercial sprinkler systems.
The tensile strength of a roller chain is a key factor to consider before purchasing a chain. The tensile strength of a chain is a function of the maximum force the chain can withstand before breaking. The three different types of tensile strength represent the force a chain can withstand without breaking. Each chain also has different strengths that can determine the type of chain you need.
The outer and inner links of the roller chain are designed for bearings. This allows the chain to be paired or unpaired with its internal links. The outer link has a pin, and the inner and outer pins are press-fit into the connecting plate. These links are usually made of steel and have a tensile strength of about 20 times their weight. The fatigue strength of two-pitch offset links is the same as that of the base chain.
They reduce wear with internal lubricants
In a roller chain, the pins and bushings rotate inside the chain without lubricant on the outside. They are in contact with the teeth of the sprocket and can easily wear out if not lubricated. The plates that connect the links and pivot about the pins can also rub against each other and cause wear. This is where lubricants come in handy. Without lubricant, the bare metal of the plate and bushing would rub against each other.
The lubricant should have the appropriate viscosity to penetrate critical internal surfaces and form an effective oil film. Recommended viscosities are listed in Table 1. Lubricants must be clean and non-corrosive. For roller chains, a good quality non-clean petroleum base oil is sufficient. While defoamers are not required, other additives such as antioxidants and extreme pressure inhibitors may be useful. However, impure oils should be avoided due to the risk of damage.
The shape of the spray head 10 overlaps with a conventional drive chain 12. The drive chain includes a plurality of rollers 24 and roller link plates 26. Each roller includes a roller pin 29 and is connected to a pair of pin link plates 28. Most drive chains have critical wear points on the sides of the roller pins 29. The shape of the spray head 10 prevents overspray onto the central portion of the roller.
In addition to preventing wear, these chains have unique specifications. Manufacturer CZPT requires raw material suppliers to certify that their products meet standards set by the American Society of Mechanical Engineers (ASME). CZPTs do not accept uncertified raw materials. For safety, the machine must be turned off before attempting to measure the chain. After the system is shut down, the measurement process should be completed in accordance with safety procedures.
General spray oil has lubricating properties, but is not as good as other types of chain lubricants. These are typically used for rust protection and include antioxidant chemicals. Generally, they are inexpensive and widely available in retail stores. However, they have the disadvantage of being very penetrating and difficult to apply evenly. Oil cannot stay on the chain as it spins, which can accelerate wear and corrosion.
They can be used to speed up or slow down machines
Typically, roller chains are chains used to move mechanical system components. Unlike belts, roller chains can be used to speed up or slow down a machine. The main difference between belts and roller chains is the lubrication process. Belts use lubrication to help them move at a constant speed, but should not exceed the critical speed of the roller chain. This critical speed is not easy to determine and lubrication is critical to its life.
A roller chain is a chain consisting of a steel bushing that holds the inner plate A and pins C together. Pin C is riveted to outer link D, while roller R surrounds each bushing B. The teeth of the sprocket are supported on the rollers. They spin freely on pins and bushings, reducing friction.
The chains can be single-stranded, double-stranded, or multi-stranded. The rated power capacity of the single strand chain can meet various drive load requirements. Multi-strand chains provide higher power capacity without increasing chain pitch or line speed. The silent chain, also known as the inverted tooth chain, consists of a series of toothed chainplates. The pins of the chain are pressed into the wide ends of the sidebars and outer links.
Although roller chains are a common mechanical component, they can fail under certain conditions. The most common cause of excessive wear is wrong to load sizing. Each manufacturer sets a maximum workload for its product. A chain that is too small for the load carried will not run smoothly and may cause premature failure. Chains can also fail due to rust or improper maintenance.
There are many ways to choose the correct size roller chain. The easiest way to choose the right one is to use a horsepower chart to determine the speed of the motor. RPM will determine the size of the chain and the number of teeth on the drive sprocket. Conveyor chains offer a variety of options to move products horizontally or vertically, even around bend radii.
editor by CX 2023-06-08
China wholesaler motorcycle sprocket marine/rigging hardware Stainless Steel Transmission Chain conveyor roller chain best lubricant for roller chain
Product Description
Stainless Steel Chain
Strength:
1. For Free Samples
2. Prompt Delivery
3. Green Product
4. International Approvals
5. Experienced Staff
Catalogue
1. Stainless steel roller chains
2. Short pitch stainless steel conveyor chain with attachments
3. Double pitch stainless steel conveyor chains
4. Double pitch stainless steel conveyor chain with attachments
5. Stainless steel hollow pin chains
Why Choose Us?
1. HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd established in 1991, we have 5 subsidiaries in China and have 6 subsidiaries abroad;
2. We covering a production area of 200, 100 square meters, have more than 1, 800 sets of advanced equipment and over 3, 100 highly skilled employees, the annual production capacity has exceeded 20, 000, 000meters;
3. We specialized in producing all kinds of standard chains and special chains, such as A or B series chains, driving chains, conveyor chains, dragging chains, agricultural chains and so on;
4. We have obtained ISO9001, ISO14001, ISO16969, AAA and API certificates.
We look CZPT to receiving your enquires soon.
| Usage: | Transmission Chain |
|---|---|
| Material: | Stainless steel |
| Surface Treatment: | Polishing |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Customization: |
Available
| Customized Request |
|---|
Different types of drive chains
Drive chains are an important part of many different types of machinery. In this article, we’ll cover a variety of different types, from square links to engineered steel. From there, we’ll discuss different types of chains, such as double and leaf chains. Let’s take a closer look at each one. Once you know what kind of chain you’re looking for, you can make a buying decision. If you’re not sure where to start, read on to learn more about these types of chains, what to look for when choosing, and how to choose the right chain for your specific application.
Engineering Steel Chain
Engineering steel chains are widely used in conveyors, bucket elevators, tensioning links, transmission chains, etc., and have the characteristics of high strength, low friction, and good shock resistance. Early models of these chains were developed for difficult-to-convey applications. They were originally made of all-steel components with flanged rollers made of cast iron. They then increase in size, strength, and spacing in response to the heavy-duty requirements of the industry.
Today, these chains are used in a wide variety of applications, including tough oil drilling operations and forklifts. They offer excellent durability and high power transfer and are available in a variety of materials. They are also ideal for harsh environments such as harsh oil drilling. Their high-strength steel construction means they can handle harsh operating conditions. Their durability is an essential feature of any chain, and CZPT Chains offers a full line of engineered steel chains to meet your exact specifications.
A drive chain made of engineered steel consists of several components: links, pin joints, and sprockets. This allows them to carry heavy loads with minimal stretch. Due to its internal mechanical advantage, the chain runs around the sprockets with almost 100% efficiency. Also, the chain is made of special steel that can withstand certain conditions. They are available in different alloys and grades. If you have any questions, please feel free to contact us.
Roller chain wear is a major problem for conveyor and drive chains. In these cases, the rollers of the chain are more prone to wear than the bushings, so lubrication is essential. Many chains are designed to work with little or no lubrication. Finally, material selection is an important factor in the design of engineered steel conveyor chains. These factors will help ensure that the chain stays in good shape.
Conveyor Chains with Square Links
There are two basic types of conveyor chains. The first is the square chain, commonly used in cranes and hoists. It’s cheap to manufacture but more prone to overload. The second is a chain that uses hook joints or detachable links. These are used for short-term power transmission and have a lubricating effect. Usually, they are made of malleable iron but can be more expensive.
Another type of chain is the removable steel chain. For moderate loads, this is an easy-to-install option. The closed end of the tab should face the sprocket. It is very important to maintain the alignment of the chain relative to the sprockets. The chain should be adjusted to suit the load before installation. It is important to keep the chain lubricated to prolong its life.
Steel chains offer a wider selection of materials and heat treatments. This chain is also more accurate than its counterpart. Steel bushing chains are less expensive but require more frequent lubrication. Steel roller chains are often used for long conveyor centers or high loads. However, lower friction requirements require lower strength chains. This means that chains with square links are a better choice for smaller conveyors. But this style has its drawbacks.
Bushing chains are made of steel and are an excellent alternative for small-scale applications. The pins are silent and prevent tooth damage. Bushed roller chains are also used to a certain extent as conveyor chains. However, the main advantage of the bushing roller chain is that it does not make any noise at all. Bushed roller chains are made of alloy steel and are suitable for very low-speed applications.
double chain
Double-strand roller chain, also known as a double-strand, consists of two rows of single-strand links. It has high impact strength, low weight, and a small form factor. Duplex roller chains are manufactured using CZPT technology, which uses solid rollers to improve sprocket tooth rotation and reduce shock loads. During the manufacturing process, the metal is heat-treated to increase strength and reduce corrosion.
A single chain is designed for a single sprocket, while a double chain consists of two identical chains connected side by side. Double chains are more durable than simple chains because double rollers contain roller bearings, pins, and other components. Simplex drive chains can handle high loads, while duplex drive chains are designed for medium-duty applications.
leaf chain
Blade chains are used in reciprocating devices such as forklifts. They are also used in machine tools for counterweight chains. Leaf chains come in a variety of lengths, usually with female or male ends. Leaf chains can be manufactured in even or odd pitches and are ideal for lifting and balancing. This article will introduce some key uses of leaf chains in drive chains. Additionally, we’ll discuss how they are made and how they behave in applications.
Most drive chains today are made from leaf chains. These chains are designed to increase the strength of the chain. However, they are less expensive than other types of chains. You can also purchase specialized leaf chains for certain applications. CZPT Chain also offers custom leaf chains for your unique needs. Leaf chains are commonly used in forklifts, material handling, and lifting applications. They are usually made from high-quality components. The BL1688 Leaf Chain has 8 x 8 laces and is sold in 10-foot boxes or 25- to 100-foot reels. The leaf chain can be cut as needed.
When selecting a leaf chain for a specific application, consider the minimum tensile strength of the chain. The minimum breaking strength must be high enough to protect the worker or machine, but must also be legal for the type of machine. Most manufacturers publish this minimum strength requirement. To make the most durable leaf chain, design engineers must consider the ISO4347 standard when choosing the right leaf chain. Leaf chain manufacturers tend to exceed international standards by about 20%.
roller chain
Roller chains are made from a variety of materials. Some common materials include steel and stainless steel. The most suitable material depends on cost, environmental conditions, and horsepower transmission design. Chain manufacturers can optimize the material for the intended use. Depending on its size, spacing, and special construction techniques, it can be made lighter or heavier. This is an advantage for applications in noise-sensitive environments. Below are some examples of common uses for roller chains.
The wear of the components in a roller chain is an unavoidable part of its operation. The amount of elongation depends on factors such as lubrication, load, and the frequency of articulation between the pin and bushing. Manufacturing critical wear parts require careful attention to detail. Proper raw materials, manufacturing, and assembly are critical to product performance and longevity. If these components aren’t of high quality, they won’t last as long as the chain should.
The industry recommends measuring the wear elongation of the roller chain to determine when it needs to be replaced. Proper safety procedures must be used to measure chain tension. The tight span of the chain shall be measured by applying the measuring load specified by ANSI. A correctly measured roller chain is safe to use. For motorcycles, the chain is bigger and stronger. Often, toothed belts are replaced by shaft drives because they are less noisy and require less maintenance.
Tensile strength is the most commonly used measurement method for roller chains. This measurement represents the amount of load the chain can withstand before it breaks. Fatigue strength is another measure of durability. Fatigue strength measures how long a roller chain can withstand long-term use before failing. These two measurements are closely related and maybe the same or different. In addition to tensile strength, fatigue strength is a useful factor to consider when purchasing a chain.
editor by CX 2023-05-18
China Hot selling 420/428/520/530 O Ring motorcycle parts marine/rigging hardware Motorcycle Conveyor link Roller Chain roller chain drive
Product Description
Double Pitch Transmission Chains with K1 Attachments -2040k1
A. Our Services:
1. Any of your kind inquiry about chain would be replied within 24 hours.
2. Well-trained and experienced sales staffs will reply all your concerns in fluent English.
3. OEM services are available with us, our professional designer would make your private idea into being.
4. Protection of your sales area, ideas of design and all your private information.
5. Delivery by air mail or ship for your orders.
6. With years of manufacture and promotion experience in global market, brings you profit and great success!
B.Technical parameters
C. Company show & Product Process
D. Packaging
| Packaging Details: | Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets |
| Delivery Detail: | five weeks |
E. FAQ:
1. Are you manufacturer or trade Company?
We are a factory founded in 1991 with trade team for international service.
2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight
3. what is your lead time for your goods?
Normally 45 days after confirmed order. 30 days could be available in low season for some items (during May to July), and 65 days during new year and hot season ( Jan to March).
4. Do you attend any Show?
We attend Hannover show in Germany, NMW in Austrilia, Canton fair, PTC, in China and many other special furniture shows.
| Usage: | Transmission Chain |
|---|---|
| Material: | Alloy/Carbon Steel |
| Surface Treatment: | Oil Blooming |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Customization: |
Available
| Customized Request |
|---|
Different types of drive chains
Drive chains are an important part of many different types of machinery. In this article, we’ll cover a variety of different types, from square links to engineered steel. From there, we’ll discuss different types of chains, such as double and leaf chains. Let’s take a closer look at each one. Once you know what kind of chain you’re looking for, you can make a buying decision. If you’re not sure where to start, read on to learn more about these types of chains, what to look for when choosing, and how to choose the right chain for your specific application.
Engineering Steel Chain
Engineering steel chains are widely used in conveyors, bucket elevators, tensioning links, transmission chains, etc., and have the characteristics of high strength, low friction, and good shock resistance. Early models of these chains were developed for difficult-to-convey applications. They were originally made of all-steel components with flanged rollers made of cast iron. They then increase in size, strength, and spacing in response to the heavy-duty requirements of the industry.
Today, these chains are used in a wide variety of applications, including tough oil drilling operations and forklifts. They offer excellent durability and high power transfer and are available in a variety of materials. They are also ideal for harsh environments such as harsh oil drilling. Their high-strength steel construction means they can handle harsh operating conditions. Their durability is an essential feature of any chain, and CZPT Chains offers a full line of engineered steel chains to meet your exact specifications.
A drive chain made of engineered steel consists of several components: links, pin joints, and sprockets. This allows them to carry heavy loads with minimal stretch. Due to its internal mechanical advantage, the chain runs around the sprockets with almost 100% efficiency. Also, the chain is made of special steel that can withstand certain conditions. They are available in different alloys and grades. If you have any questions, please feel free to contact us.
Roller chain wear is a major problem for conveyor and drive chains. In these cases, the rollers of the chain are more prone to wear than the bushings, so lubrication is essential. Many chains are designed to work with little or no lubrication. Finally, material selection is an important factor in the design of engineered steel conveyor chains. These factors will help ensure that the chain stays in good shape.
Conveyor Chains with Square Links
There are two basic types of conveyor chains. The first is the square chain, commonly used in cranes and hoists. It’s cheap to manufacture but more prone to overload. The second is a chain that uses hook joints or detachable links. These are used for short-term power transmission and have a lubricating effect. Usually, they are made of malleable iron but can be more expensive.
Another type of chain is the removable steel chain. For moderate loads, this is an easy-to-install option. The closed end of the tab should face the sprocket. It is very important to maintain the alignment of the chain relative to the sprockets. The chain should be adjusted to suit the load before installation. It is important to keep the chain lubricated to prolong its life.
Steel chains offer a wider selection of materials and heat treatments. This chain is also more accurate than its counterpart. Steel bushing chains are less expensive but require more frequent lubrication. Steel roller chains are often used for long conveyor centers or high loads. However, lower friction requirements require lower strength chains. This means that chains with square links are a better choice for smaller conveyors. But this style has its drawbacks.
Bushing chains are made of steel and are an excellent alternative for small-scale applications. The pins are silent and prevent tooth damage. Bushed roller chains are also used to a certain extent as conveyor chains. However, the main advantage of the bushing roller chain is that it does not make any noise at all. Bushed roller chains are made of alloy steel and are suitable for very low-speed applications.
double chain
Double-strand roller chain, also known as a double-strand, consists of two rows of single-strand links. It has high impact strength, low weight, and a small form factor. Duplex roller chains are manufactured using CZPT technology, which uses solid rollers to improve sprocket tooth rotation and reduce shock loads. During the manufacturing process, the metal is heat-treated to increase strength and reduce corrosion.
A single chain is designed for a single sprocket, while a double chain consists of two identical chains connected side by side. Double chains are more durable than simple chains because double rollers contain roller bearings, pins, and other components. Simplex drive chains can handle high loads, while duplex drive chains are designed for medium-duty applications.
leaf chain
Blade chains are used in reciprocating devices such as forklifts. They are also used in machine tools for counterweight chains. Leaf chains come in a variety of lengths, usually with female or male ends. Leaf chains can be manufactured in even or odd pitches and are ideal for lifting and balancing. This article will introduce some key uses of leaf chains in drive chains. Additionally, we’ll discuss how they are made and how they behave in applications.
Most drive chains today are made from leaf chains. These chains are designed to increase the strength of the chain. However, they are less expensive than other types of chains. You can also purchase specialized leaf chains for certain applications. CZPT Chain also offers custom leaf chains for your unique needs. Leaf chains are commonly used in forklifts, material handling, and lifting applications. They are usually made from high-quality components. The BL1688 Leaf Chain has 8 x 8 laces and is sold in 10-foot boxes or 25- to 100-foot reels. The leaf chain can be cut as needed.
When selecting a leaf chain for a specific application, consider the minimum tensile strength of the chain. The minimum breaking strength must be high enough to protect the worker or machine, but must also be legal for the type of machine. Most manufacturers publish this minimum strength requirement. To make the most durable leaf chain, design engineers must consider the ISO4347 standard when choosing the right leaf chain. Leaf chain manufacturers tend to exceed international standards by about 20%.
roller chain
Roller chains are made from a variety of materials. Some common materials include steel and stainless steel. The most suitable material depends on cost, environmental conditions, and horsepower transmission design. Chain manufacturers can optimize the material for the intended use. Depending on its size, spacing, and special construction techniques, it can be made lighter or heavier. This is an advantage for applications in noise-sensitive environments. Below are some examples of common uses for roller chains.
The wear of the components in a roller chain is an unavoidable part of its operation. The amount of elongation depends on factors such as lubrication, load, and the frequency of articulation between the pin and bushing. Manufacturing critical wear parts require careful attention to detail. Proper raw materials, manufacturing, and assembly are critical to product performance and longevity. If these components aren’t of high quality, they won’t last as long as the chain should.
The industry recommends measuring the wear elongation of the roller chain to determine when it needs to be replaced. Proper safety procedures must be used to measure chain tension. The tight span of the chain shall be measured by applying the measuring load specified by ANSI. A correctly measured roller chain is safe to use. For motorcycles, the chain is bigger and stronger. Often, toothed belts are replaced by shaft drives because they are less noisy and require less maintenance.
Tensile strength is the most commonly used measurement method for roller chains. This measurement represents the amount of load the chain can withstand before it breaks. Fatigue strength is another measure of durability. Fatigue strength measures how long a roller chain can withstand long-term use before failing. These two measurements are closely related and maybe the same or different. In addition to tensile strength, fatigue strength is a useful factor to consider when purchasing a chain.
editor by CX 2023-05-17
China OEM ISO 9001 Approved motorcycle part sprocket Stainless Steel Agricultural Transmission Roller conveyor Chain blind roller chain
Product Description
ISO 9001 Approved Agricultural Chain
Why choose us ?
1. HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd established in 1991, we have 5 subsidiaries in china and also have 6 subsidiaries abroad;
2. we covering a production area of 200,100 square meters, have more than 1,800 sets of advanced equipment and over 3,100 highly skilled employees, the annual production capacity has exceeded 20,000,000 meters;
3. we specialized in producing all kinds of standard chains and special chains, such as A or B series chains, drive chains, conveyor chains, drag chains, agricultural chains, sprockets, gears and so on;
4. we have obtained ISO9001, ISO14001, ISO16969, AAA and API certificates.
5. Our partners among world top enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, etc.
Our agricultural chains are as following items:
1. SH series high strength heavy duty short pitch roller chains
2. SP series high strength heavy duty short pitch roller chains
3. Walking tractor chains
4. Combine chains
5. ZGS38 combine chain with attachments
6. Rice harvester chains
7. Various agricultural chain with attachments
8. S type steel agricultural chains
9. S type steel agricultural chain with attachments
10. A Type steel agricultural chains
11. CA type steel agricultural chains
12. C type steel agricultural chain with attachments
13. Special agricultural chain with attachments
1) Related Products
2) Certificates
HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd was founded in 1 9 9 1, and now it has five wholly owned subsidiaries, one in ZheJiang province, other four in HangZhou, ZHangZhoug province, it is a professional manufacturer of chains, sprockets, tooth gears and various power transmission products.
The group has XIHU (WEST LAKE) DIS.HUA, ZIQIANG brands, is focused on producing all variety of standard roller chains and special chains, such as conveyor chain, stainless steel chain, agricultural chain. With Xihu (West Lake) Dis.hua brand registered in more than 70 countries like America, Europe, Japan, it is building long term cooperation with these world top enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR.
There is a technical center of province level, Xihu (West Lake) Dis.hua academician working station, experiment station for Xihu (West Lake) Dis.hua post doctors, and national hundreds of program set up in Xihu (West Lake) Dis.hua group. With these platforms and strong technical ability, the more than hundreds of Engineers and technicians have developed all variety of special high precise and high strength products, conducted mold programs for key components in the car and national industry revitalizing program.
Great attention has been paid on environmental protection and energy saving. The product well displays environmental protection and energy saving. In the year of 2 0 0 0, Xihu (West Lake) Dis.hua took the lead in gaining I S O 1 4 0 0 1 environment management certificate and thereafter passed the inspection of clean production and recycling economy, winning the title of “ZHangZhoug Green Enterprise”.
“We are always serving our customers with our best products.”
| Usage: | Transmission Chain |
|---|---|
| Material: | Alloy/Carbon Steel |
| Surface Treatment: | Oil Blooming |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*11/128" |
| Structure: | Roller Chain |
| Customization: |
Available
| Customized Request |
|---|
buy drive chain
Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.
roller chain
Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.
mute chain
The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.
flat top chain
One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.
double chain
Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.
Self-lubricating chain
Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.
editor by CX 2023-05-16
China Professional Conveyor Transmission Motorcycle Industrial Carbon Stee Roller Chain Short Pitch Precision Stainless Steel Hollow Pin bush chain
Product Description
Product Description
Series : ANSI SS 40 /SS 50 / SS 60 / SS 80 / SS 100 etc.
Materal : SS 304
Packing : 5M/PCS or 10 FT/PCS Or as your require.
Delivery time : around 35 wworking days.
Product Attribute
| Product name | Transmission Standard Roller Chain |
|
Surface Treatment |
Shot Peening ,Tempering Oiling ,Nickel-plated Grease, zince plated, Heat Treatment ,Stain proofing Carburizing ,Pre-stretched and anti-fatigue ,Quenching |
| Product application | Industry machine,Agriculture, mining, metallurgy, petrochemical industry, lifting and transportation and other industries |
| Product Series |
Series A, Series B, Heavy Duty |
| material |
Stainless steel and carbon steel |
| structure |
Simplex/Duplex/Triplex |
| Port |
Any sea port or airport in China |
| Brand | TV OEM |
| Payment |
L/C, T/T, D/P, Western Union |
| Package |
Chain, Plastic Bag, Color Box, Wooden Case. or OEM |
| A Series | 03C,04C-1,06C-1,085-1,08A-1,10A-1,12A-1,16A-1,20A-1,24A-1,28A-1,32A-1,36A-1,40A-1,48A-1.
15,25,35,41,40,50,60,80,100,120,140,160,180,200,240 |
| 04C-2,06C-2,085-2,08A-2,10A-2,12A-2,16A-2,20A-2,24A-2,28A-2,32A-2,36A-2,40A-2,48A-2.
25-2,35-2,41-2,40-2,50-2,60-2,80-2,100-2,120-2,140-2,160-2,180-2,200-2,240-2. |
|
| 04C-3,06C-3,085-3,08A-3,10A-3,12A-3,16A-3,20A-3,24A-3,28A-3,32A-3,36A-3,40A-3,48A-3.
25-3,35-3,41-3,40-3,50-3,60-3,80-3,100-3,120-3,140-3,160-3,180-3,200-3,240-3. |
|
| B Series | 05B-1,06B-1,08B-1,10B-1,12B-1,16B-1,20B-1,24B-1,28B-1,32B-1,40B-1,48B-1,56B-1,64B-1,72B-1. |
| 05B-2,06B-2,08B-2,10B-2,12B-2,16B-2,20B-2,24B-2,28B-2,32B-2,40B-2,48B-2,56B-2,64B-2,72B-2. |
|
| 05B-3,06B-3,08B-3,10B-3,12B-3,16B-3,20B-3,24B-3,28B-3,32B-3,40B-3,48B-3,56B-3,64B-3,72B-3. |
|
| Heavy Duty | 08AH-1,10AH-1,12AH-1,16AH-1,20AH-1,24AH-1,28AH-1,32AH-1,36AH-1,40AH-1,48AH-1
35H,40H,50H,60H,80H,100H,120H,140H,160H,180H,200H,240H |
| 12AH-2,16AH-2,20AH-2,24AH-2,28AH-2,32AH-2,40AH-2,
35H-2,40H-2,50H-2,60H-2,80H-2,100H-2,120H-2,140H-2,160H-2,180H-2,200H-2,240H-2. |
|
| 12AH-3,16AH-3,20AH-3,24AH-3,28AH-3,32AH-3,40AH-3
35H-3,40H-3,50H-3,60H-3,80H-3,100H-3,120H-3,140H-3,160H-3,180H-3,200H-3,240H-3. |
|
| Double pitch Series |
208A,208B,210A,210B,212A,212B,216A,216AH,216B,220A,220B,224A,224B,228B,232B
2040,2050,2060,2080,2080H,2100,2120 |
| We also carry out OEM according to your requirements | |
Product Parameters
Our Advantages
Company advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.
Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.
With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.
WHY CHOOSE US
Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.
Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets
Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.
100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.
FAQ
Q1: What’s your average lead time?
A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate.
Q2: Is your price better than your competitors given the same quality?
A: Definitely YES. We provide the most competitive price in the power transmission industry. If price disparity exists, we’ll be more than happy to do a price match.
Q3: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.
Q4: Can we inspect the goods before shipment?
A: Yes. You or your representative or any third-party inspection party assigned is allowed access to our facility and do the inspection.
Q5: What kind of payment method is acceptable for your mill?
A: We’re flexible. We take T/T, L/C, or any other online payment methods so long as it’s applicable for you.
Q6: What if I have any other questions?
A: Whenever in doubt, you’re always encouraged to consult our sales associate any time – They will help you to your satisfaction.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Mining Equipment |
| Surface Treatment: | SS304 |
| Samples: |
US$ 5/Meter
1 Meter(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
What to look for in a roller chain
There are many different factors to consider when purchasing a roller chain. One of the most important factors is tensile strength, which represents the force required to break the chain. Roller chains are available in three different tensile strengths: minimum, average and ultimate. Each strength reflects a different limit to the load the chain can handle. However, these limits are not always equal and you should be aware of the differences between roller chains.
Canonical chain
Most roller chains have standard sizes printed on the side panels. This is usually “40” or “C2080H”, but can also be the letter “B”. If the chain is old, it will need to be cleaned to see its size. You can find the size on the standard roller chain size chart, but not everyone is marked. To determine the size, measure the diameter and pitch of the chain, then compare the results to the chart to see what size you need.
Heavy-duty roller chains are available with heat-treated pins, side plates, and rollers. In addition to being heat treated, they are also factory pre-stretched, which reduces wear on these parts. If properly maintained, they can last for years, reducing the risk of failure or corrosion. Depending on the application, standard roller chains are available in different sizes. It can be purchased separately. There are several options to choose from, depending on the size and strength of the application.
PEER roller chains contain solid rollers to reduce shock loads on the sprocket teeth. Heat treating and preloading all components of the PEER chain helps minimize initial elongation. Hot-dip lubrication ensures complete lubrication of all chain components, extending their life and reducing maintenance costs. For heavy-duty applications, ASME/ANSI-B29.1 chain is a good choice.
Standard roller chains are made of steel or alloy steel. However, it can be made of other materials such as stainless steel. In addition to steel, stainless steel is often used in food processing machinery where chain lubrication is an issue. Brass and nylon are also sometimes used. However, they are not that popular. Therefore, you should always check with your supplier before purchasing. By comparing the tensile strength of two different chains and making an informed decision, you can get the best price and service.
Chain without bushing
Bushless roller chains have advantages over conventional roller chains. Unlike conventional chains, bushless chains have extensive lateral flexibility, which increases the chain’s lubrication flow. The inner plates of bushless chains have protruding shoulders so the oil can flow through them more easily and efficiently. This is an important characteristic of a smooth-running chain. Additionally, bushless chains may have improved shifting performance.
The strength of a bushingless roller chain is measured in terms of tensile strength and fatigue strength. The former measures the load a chain can withstand before breaking. Fatigue strength is equally important, and factors that affect fatigue strength include the steel used to make the chain components, the pitch hole fabrication, the type of shot peening on the chain, and the design and thickness of the chain. For example, if the chain is too thin, it may not be enough for heavy-duty applications.
Like traditional roller chains, bushingless roller chains have two different types of links. The inner link has two inner plates connected by pins, while the outer chain has two outer plates held together by bushings. A bushingless roller chain is similar to a traditional chain, except it eliminates a step in the assembly process by stamping the tube into the inner plate. So if you want a smoother ride, a bushingless roller chain is a better choice.
There are two different sizes of bushingless roller chains. One size is designed for use with standard single-strand chains, while the other size is designed for use with double-strand or triple-strand chains. Bushless chains are generally shorter than conventional chains, so they can fit in tighter spaces. Bushless chains are made of the highest quality materials. These chain attachments are case hardened for optimum strength and durability.
Mute chain
The silent roller chain has a smooth, low-noise drive. They are made of stacked rows of flat chainplates with a gear-like profile that meshes with the sprocket teeth. Each chainplate is attached to a corresponding sprocket, which also allows the chain to bend. While these basic components are the same for every silent roller chain, there are many variations that allow them to be used in a variety of applications.
The most popular high-speed transmission, silent chains feature gear-like sprockets. They can be made from single or multiple strands of material. Single-strand chains are less expensive than multi-strand chains, but they tend to wear out faster if not lubricated. Single-strand roller chains can be used for years without lubrication, but for your application, wide silent chains are still worth considering.
The design and construction of silent chains make them ideal for conveying a wide variety of products. They have flat, heat-resistant surfaces. They are also durable and non-slip. They are available in a variety of pitch sizes, widths, and mounting styles. Whether you need chains for general purpose conveyors or glass bottle transport applications, we have you covered. Ask about the benefits of silent roller chain conveyors.
Inverted tooth chains are another option for quieter chains. These chains are designed to reduce noise from engine-related friction. Silent chains are more common, and manufacturers have fallen in love with them. A silent chain consists of several links connected to the sprocket teeth. Teeth rotate to reduce noise, vibration, and chord action. These are the main reasons why silent chains are so popular.
ANSI chain pitch
To measure your bike’s chain pitch, you can use a caliper. This measurement is taken from the center of the rolling pin to the center of the next rolling pin. Chains come in many sizes, but ANSI is the most common chain standard in the United States. A caliper is handy if you’re not sure which size to buy, as it allows you to check for worn sprockets.
Chains that meet ANSI standards will be characterized by a certain pitch. This measurement is based on the width and spacing of the roll. The spacing is usually greater than the width. The standard number will be the right number for the width of the chain or the left number for the rollers. The number on the left indicates whether the chain is lightweight or heavyweight. Heavyweight chains are designated by the suffix “H”.
Common chain sizes are based on ANSI chain pitch. Pitch is the minimum distance between bushing and sprocket. The smaller the chain pitch, the greater the total distance between the two points. This means the chain will last longer. However, if you are buying a chain for a specific application, you should check the pitch carefully as it can affect the performance of the chain.
Roller chain wear measurement
The purpose of roller chain wear measurement is to prevent breakage by monitoring the strain on the chain. There are several ways to measure roller chain wear. The first is to remove the chain from its working position and measure the distance from the sprocket to its measuring end. Another way is to measure the pitch of the chain or the distance between two pins. This method is superior to other methods because it is convenient and accurate.
When measuring the wear of a roller chain, it is important to note that the elements of the chain will gradually deform. About 3.75% of the total wear will be on the pins and the rest will be on the internal links. These wear measurements will vary based on the nominal pitch of the chain and the amount of friction the chain is experiencing. Proper lubrication between pins and bushings, load and frequency of articulation all affect wear rates.
It is important to measure the amount of wear on the roller chain to avoid excessive machine failures. The longer the chain runs, the more wear it will wear. Although the length of the chain should be less than the center distance, the excessive load will cause premature wear. Therefore, lubrication is essential. Additionally, the sag of the chain should not exceed 2% to 4% of its center-to-center distance. Finally, check for unusual noise or visible defects. A common cause of excessive roller chain wear is the size of the load. Every chain manufacturer sets a maximum workload for its product.
There are several ways to measure roller chain wear. If using a high-speed drive, it should have at least 11 teeth, and a medium-speed drive should have at least 25 teeth. Also, be sure to check the length of the chain, even if you should. The same goes for the pin diameter, which should be the same or different pitch as the roller chain.
editor by CX 2023-05-15
China Motorcycle Transmission Spare Parts Timing Chain 25h-88L with Reasonable Price roller chain break
Solution Description
Bike Transmission Spare Areas Timing Chain 25h-88L With Reasonable Value !
Merchandise Picture:
Specification:
| Item title: | Motorcycle Chains |
| Motorbike model: | 25H-88L |
| Origin: | China |
| Color: | Black |
| Brand: | BOST |
| Payment : | L/C, TT,DP and so forth. |
| Supply time: | twenty-35 days |
| Packing: | BOST Box or OEM |
| Shipping: | By sea, by air, by land transportation, by categorical . |
| Cargo port: | HangZhou |
| Content: | Alloy Metal |
Our Organization Profile:
Our Model And Associates:
Our Model Sequence Packing:
Our Showroom:
Our Warehouse:
We ‘re in Exhibitions:
Shipping and delivery Way:
Motorbike Parts Name For Your Reference:
| Motor Elements | Spark Plug, cylinder kit, head cylinder, cylinder, carburetor, piston established, piston ring established, pump oil, push rod, valve set, rockerarm, cam follower, cam follower with shaft, centre clutch, outer clutch, cam shaft, equipment speedo, and many others. |
| Transmission Parts | Shaft kick starter, crank shaft, housing assy, connecting rod kit, sprocket established, clutch assy, clutch disc,Clutch pressure plate, chain and many others. |
| Wheel Elements | Rear hub, cap rear bub, cap entrance hub, front hub, sprocket, front brake disk, brake pad, brake shoe, rim, rubber rear hub, collar cushion, racing steering, spoke, bolt sprocket rear, axle, hydraulic brake master cylinder and so on. |
| Cable Elements | Throttle cable, clutch cable, entrance brake, meter cable, entrance switch cable, velocity change, line of battery, wire harness, swap rear brake, velocity cable and so forth. |
| Human body elements | Rear shock absorber, steering stem head assy, gear change pedal, steering stem assy, brake rod, brake pedal, exhaust muffler, foot relaxation rubber, provider, side stand, entrance shock, middle stand, seat, fuel tank, handle bar, entrance mud-guard, front pedal rod, kick starter, rear fork arm, bracket head light-weight, lever set, ignition coil and so forth. |
| Electric Parts | Clutch/brake switch set, battery, fly-wheel assy, clutch/brake lever&swap assy, starter relay, horn, flasher, stator self assy, handle lock, gasoline lock, stator assy, starter coil/light-weight coil, C,D,I, rectifier, ignition swap, cap gas tank etc. |
| Plastic Parts | Bulb holder, meter assy, mirror, situation of head light, include gas tank, lever protector set, residence head light, entrance fender, lens tail light, rear fender, chain protect, head light, tail gentle, winker mild, aspect go over and so forth. |
| Gasket series | Oil seal kit, gasket cylinder, gasket exhaust, total gasket kit, grip rubber set, carburetor joint and so on |
| Equipment | Tail box, helmets, sticker, cap, clothing, gloves, paint learn, alarm system-mp3, alarm program mp3-2, alarm technique, gas tank web, rear foot pedal with shade, rear foot pedal with color inflator, grip rubbe with shade, tire sealant, grip rubber with color and so on. |
FAQ:
Q: Are you a investing firm or manufacturing unit?
A: A investing business, we have our own cooperated factory.
Welcome you to my company in HangZhou China.
Q: Will you provide samples ?
A: Yes, we will. Sample will be provided right after get is confirmed.
Q: Did and Will your firm show up at trade display?
A: Yes, we will show up at the Colombia and Mexico Motorbike Expo, also attended HangZhou Canton Reasonable, we will prepare to join exhibitions in other nations in the future.
Q: What is your most significant edge?
A: Integrity is lifestyle of our firm, best price and great quality as a basis.
Q: What is your price time period?
A: Rates are based mostly on EXW HangZhou,FOB/CIF,and many others
If you have more inquiry, welcome to check out our internet site to get a lot more data.,
Http://bostmoto
|
US $0.01-99.99 / Piece | |
10,000 Pieces (Min. Order) |
###
| Type: | Chain |
|---|---|
| Material: | Alloy Steel |
| Certification: | ISO9001：2001, CCC, CE |
| Number of Row: | Single Row |
| Transport Package: | Plastic Bag/Box/Carton |
| Trademark: | BOST |
###
| Customization: |
Available
|
|---|
###
| Item name: | Motorcycle Chains |
| Motorcycle model: | 25H-88L |
| Origin: | China |
| Color: | Black |
| Brand: | BOST |
| Payment : | L/C, TT,DP etc. |
| Delivery time: | 20-35 days |
| Packing: | BOST Box or OEM |
| Shipping: | By sea, by air, by land transportation, by express . |
| Shipment port: | Guangzhou |
| Material: | Alloy Steel |
###
| Engine Parts | Spark Plug, cylinder kit, head cylinder, cylinder, carburetor, piston set, piston ring set, pump oil, push rod, valve set, rockerarm, cam follower, cam follower with shaft, center clutch, outer clutch, cam shaft, gear speedo, etc. |
| Transmission Parts | Shaft kick starter, crank shaft, housing assy, connecting rod kit, sprocket set, clutch assy, clutch disc,Clutch pressure plate, chain etc. |
| Wheel Parts | Rear hub, cap rear bub, cap front hub, front hub, sprocket, front brake disk, brake pad, brake shoe, rim, rubber rear hub, collar cushion, racing steering, spoke, bolt sprocket rear, axle, hydraulic brake master cylinder etc. |
| Cable Parts | Throttle cable, clutch cable, front brake, meter cable, front switch cable, speed switch, line of battery, wire harness, switch rear brake, speed cable etc. |
| Body parts | Rear shock absorber, steering stem head assy, gear change pedal, steering stem assy, brake rod, brake pedal, exhaust muffler, foot rest rubber, carrier, side stand, front shock, center stand, seat, fuel tank, handle bar, front mud-guard, front pedal rod, kick starter, rear fork arm, bracket head light, lever set, ignition coil etc. |
| Electric Parts | Clutch/brake switch set, battery, fly-wheel assy, clutch/brake lever&switch assy, starter relay, horn, flasher, stator self assy, handle lock, fuel lock, stator assy, starter coil/light coil, C,D,I, rectifier, ignition switch, cap fuel tank etc. |
| Plastic Parts | Bulb holder, meter assy, mirror, case of head light, cover fuel tank, lever protector set, house head light, front fender, lens tail light, rear fender, chain cover, head light, tail light, winker light, side cover etc. |
| Gasket series | Oil seal kit, gasket cylinder, gasket exhaust, full gasket kit, grip rubber set, carburetor joint etc |
| Accessories | Tail box, helmets, sticker, cap, clothes, gloves, paint master, alarm system-mp3, alarm system mp3-2, alarm system, fuel tank net, rear foot pedal with color, rear foot pedal with color inflator, grip rubbe with color, tire sealant, grip rubber with color etc. |
|
US $0.01-99.99 / Piece | |
10,000 Pieces (Min. Order) |
###
| Type: | Chain |
|---|---|
| Material: | Alloy Steel |
| Certification: | ISO9001：2001, CCC, CE |
| Number of Row: | Single Row |
| Transport Package: | Plastic Bag/Box/Carton |
| Trademark: | BOST |
###
| Customization: |
Available
|
|---|
###
| Item name: | Motorcycle Chains |
| Motorcycle model: | 25H-88L |
| Origin: | China |
| Color: | Black |
| Brand: | BOST |
| Payment : | L/C, TT,DP etc. |
| Delivery time: | 20-35 days |
| Packing: | BOST Box or OEM |
| Shipping: | By sea, by air, by land transportation, by express . |
| Shipment port: | Guangzhou |
| Material: | Alloy Steel |
###
| Engine Parts | Spark Plug, cylinder kit, head cylinder, cylinder, carburetor, piston set, piston ring set, pump oil, push rod, valve set, rockerarm, cam follower, cam follower with shaft, center clutch, outer clutch, cam shaft, gear speedo, etc. |
| Transmission Parts | Shaft kick starter, crank shaft, housing assy, connecting rod kit, sprocket set, clutch assy, clutch disc,Clutch pressure plate, chain etc. |
| Wheel Parts | Rear hub, cap rear bub, cap front hub, front hub, sprocket, front brake disk, brake pad, brake shoe, rim, rubber rear hub, collar cushion, racing steering, spoke, bolt sprocket rear, axle, hydraulic brake master cylinder etc. |
| Cable Parts | Throttle cable, clutch cable, front brake, meter cable, front switch cable, speed switch, line of battery, wire harness, switch rear brake, speed cable etc. |
| Body parts | Rear shock absorber, steering stem head assy, gear change pedal, steering stem assy, brake rod, brake pedal, exhaust muffler, foot rest rubber, carrier, side stand, front shock, center stand, seat, fuel tank, handle bar, front mud-guard, front pedal rod, kick starter, rear fork arm, bracket head light, lever set, ignition coil etc. |
| Electric Parts | Clutch/brake switch set, battery, fly-wheel assy, clutch/brake lever&switch assy, starter relay, horn, flasher, stator self assy, handle lock, fuel lock, stator assy, starter coil/light coil, C,D,I, rectifier, ignition switch, cap fuel tank etc. |
| Plastic Parts | Bulb holder, meter assy, mirror, case of head light, cover fuel tank, lever protector set, house head light, front fender, lens tail light, rear fender, chain cover, head light, tail light, winker light, side cover etc. |
| Gasket series | Oil seal kit, gasket cylinder, gasket exhaust, full gasket kit, grip rubber set, carburetor joint etc |
| Accessories | Tail box, helmets, sticker, cap, clothes, gloves, paint master, alarm system-mp3, alarm system mp3-2, alarm system, fuel tank net, rear foot pedal with color, rear foot pedal with color inflator, grip rubbe with color, tire sealant, grip rubber with color etc. |
Types of Roller Chains
There are several types of roller chains available. These chains have different properties and serve different purposes. Here you will learn about diamond roller chains, X-ring and O-ring chains, inverted tooth chains, and self-lubricating chains. You can choose the type that best suits your needs by reading this article. It will also help you make an informed decision. Buying the right roller chain for your needs is easy. Hope this article is helpful to you!
Diamond roller chain
Diamond roller chains are more efficient than other chains and can significantly extend chain life. The superior design of the chain prevents internal rust from seeping out. Additionally, Diamond ACE features a corrosion-resistant exterior and a zinc-nickel pre-assembled coating that provides extended corrosion protection and wear resistance. These features reduce chain downtime and labor costs, saving a building materials manufacturing company nearly $33,000 over the life of its machines.
Diamond series chains lead the industry in quality and durability, with industry-leading tensile strength and the lowest total cost of ownership. With a diverse product portfolio including standard chains, specialty chains, and custom chains, the company is sure to provide the right chain for your application. The company also offers a wide range of accessories for a variety of machinery. For more information, please visit the company website.
As one of the leading manufacturers of roller chains, the CZPT Company offers unparalleled expertise and wear resistance in the power transmission market. CZPT is trusted by leading industries and provides the highest return on investment. The diamond is a symbol of strength and durability, and the company chose it as the company’s trademark to convey its core values. CZPTs can last up to 100 years or more in harsh conditions, even in underwater environments.
Self-lubricating chain
Self-lubricating roller chains are designed to increase performance while maintaining a high level of cleanliness. These chains are made of sintered alloy bushings impregnated with lubricant and pins specially treated to release oil when necessary. These chains have a long service life and are suitable for environments where regular lubrication is difficult. Below are the benefits of self-lubricating roller chains.
Maintenance-free self-lubricating roller chains are the perfect replacement for standard roller chains. They are suitable for packaging, printing, textile, and sawmill applications. These chains reduce downtime and increase productivity. Furthermore, they reduce the risk of contamination. Another advantage is that there are many types of self-lubricating roller chains to choose from, allowing you to choose the one that best suits your needs. To learn more about these benefits, read the Maintenance Free Roller Chains Market Report published by Dataintelo.
CAN-AM self-lubricating roller chains ensure stick-free operation. These chains are available in ANSI/BS standard and double pitch variants. They feature oil-impregnated bushings and preloaded sintered steel bushings for long life. These self-lubricating roller chains are drop-in replacements for standard roller chains and run on standard roller chain sprockets.
X-Ring and O-Ring Chains
Both O-ring and X-ring roller chains are sealed and unsealed. You’ll find them on vintage bikes and small economy cars. Other applications include bulldozer treads and conveyor belts. Standard chains are made of simple plain bearings that require lubrication every few hundred miles. While the former is the most affordable type of roller chain, they do require more maintenance than O-rings.
The main difference between the two types of chains is the friction and cost they generate. X-rings are slightly less expensive, but they create less friction than O-rings. X-rings are a more affordable option for road riders, while O-ring chains are more expensive for off-road racers. In some cases, X-ring and O-ring roller chains can be distinguished by the price tag alone.
Both X-ring and O-ring roller sprockets are available in a variety of styles. The two styles offer comparable performance, but there are some key differences to consider. X-rings are generally better for longer travel as they offer greater durability and performance. O-rings are usually more expensive than X-ring chains, but if you’re thinking about long trips, they’re a great option.
Reverse chain
Inverted roller chains are often referred to as silent chains. They have two protrusions on each board. The outer surface is ground to include an angle of sixty or seventy degrees. These protrusions about the working surfaces of the sprocket teeth. The inner surface or shape of the sprocket can clear the sprocket. This produces a silent but still valid chain. This type of chain is used in transmissions to move heavy objects.
There are three basic types of inverted toothed roller chains. Simple chains are single chains, while double and triple chains have two or three strands. In these types of chains, the pins pass through-hardened steel bushings at the ends of the links. The main difference between these types is their size. If you are not sure what size you need, first calculate the capacity of the chain. You might be surprised to learn that the smaller the diameter the better.
The number of links in a reverse roller chain determines the frequency of vibration. The frequency depends on the size of the chain and the length of the chain between the sprockets. The shorter the chain, the bigger the “pull” – the up-and-down jitter caused by the sprocket. This causes additional peak loads on the drive and shortens its life.
PEER Chain’s Heavy Duty Series Double-Stranded Roller Chains
Heavy-duty double-strand roller chains are ideal for industrial and agricultural use as they provide extra stability and strength. PEER Chains manufactures chains in various lengths and pitches and offers different accessories including sprockets and pre tensioned chains. These chains are also available in a variety of different alloys and grades. Listed below are some of the most common uses for heavy-duty double strand roller chains.
Heavy-duty PEER double-strand roller chains are available in a variety of styles and types, including the HKK NICKEL PLATED series. These chains are best suited for outdoor and mildly corrosive applications. They use a patented process to increase fatigue strength and reduce initial elongation. In addition, HKK double pitch twin-strand roller chains are lighter and less expensive than standard roller chains.
The report also highlights the competitive environment and the latest market trends. The report identifies key players in the Roller Chains industry, including manufacturing, sales, and global market share. It also provides detailed company profiles and analyses of each vendor, including recent product launches, partnerships, and mergers and acquisitions. It also provides the competitive landscape, including company profiles, product mix, and production scale. Once you know what to expect from the market, you can make a buying decision.
Maintenance of Mechanical Flexible Couplings
Proper maintenance of mechanical flexible couplings on roller chains is critical to ensuring the proper operation and reliability of the system. Maintenance of these couplings includes periodic inspection of the components. Check for signs of fatigue and wear. Regular inspections will help determine when to replace the coupling. It also helps determine the remaining life of the coupling.
Couplings should be replaced periodically for optimum performance. When replacing, be sure to use the correct parts. Make sure the coupling type matches the coupling type and chain size. Identical coupling parts may not fit, so a cross-reference guide or manufacturer’s spec number may be helpful. Make sure that the coupling is fitted with a suitable roller chain.
Mechanical elastic couplings on the roller chain can be easily lubricated to avoid premature failure. Elastomeric couplings can accommodate minor shaft misalignments and are suitable for high rotational speeds. Also, it absorbs shocks. Its flexibility is due to loose components. Additionally, lubrication is essential to reduce wear on coupling components.
Roller chain size
Knowing the basic dimensions of the rollers is essential if you need to find the right roller chain for your needs. The three key dimensions of a roller chain are pitch, width, and pin diameter. These dimensions are important because they are used to identify the type of chain. These dimensions do not normally appear in chain manufacturer catalogs. They are usually designed for people designing new equipment. They are not important to maintenance technicians, but they are important to know if you are looking for a specific type of roller chain.
Once you know the exact size of the chain, you can move on to choosing the correct type. You can use the printable template to measure your chain, which makes it easy to compare with the size chart. Don’t forget to check the rest of the roller chain’s specs to make sure it fits your machine. Using the Roller Chain Size Chart is an easy way to determine the proper length, width, and height for your application.
When buying a roller chain, be sure to check the number of teeth and the ratio of the two. A common ratio is 2:1. The drive sprocket must have at least twice as many teeth as the roller sprocket. If the chain is used for high precision, check the type of sprocket as this will determine the correct size of the chain. You can also choose between slip-fit and press-fit mid plates.
editor by czh 2023-01-21
China Motorcycle Slide Chain/Roce Cadena Goma Caucho Deslizador Caucho Cadena Daytona Dy200gy Shark, Honda Nxr-125 best lubricant for roller chain
Item Description
1,Sturdy and Substantial Top quality.
two,Nice-looking packing.
three,Prompt delivery.
four,Wide assortment of parts for much more designs accessible.
five,OEM production welcome
6,Most competitive wholesale prices.
7. A single cease purchasing support offered.
Our firm is positioned in HangZhou and specialized in manufacturing and trading of moto elements and components.We could supply the elements for the popular Japanese brand,Chinese makes and Indian brand motorcycles.
With an skilled and expert crew, we have exported our items to several international locations and regions all in excess of the entire world, particularly Latin The united states,Center East,East Europe and Africa.Our merchandise take pleasure in a good status amongst our clients. We welcome consumers, business associations and close friends from all areas of the globe to get in touch with us and seek cooperation for mutual benefits.
We could supply elements for a lot more versions like Honda,Suzuki,Yamaha,Bajaj,TVS.and Chinese motos Qingqi,Keeway,Benelli,Haojue,Sanyua,Xihu (West Lake) Dis.n and so on. For more parts and catalog,Welcome to get in touch with us. Website:
The scorching areas accessible:
| Off highway elements | For Qingqi GXT200,GXT250,Honda XL125,XR150,Yamaha DT175,XTZ125 And many others |
| Scooter elements | Gy6 50/a hundred twenty five/one hundred fifty scooter parts,AN125,WH125 scooter components,Keeway scooter elements |
| 2-stroke elements | JOG50 3KJ,AG100,Dio50,MBK,PGT BUXY,PIAGIO Typhoon,AX100 |
| Bajaj components | BM150,BM100,Dscover135,Pulsar200,200NS,Platino etc |
| Tricycle components | 200cc cargo tricycle,250cc/300cc tricycles,and bajaj 3w4s elements,TVS king |
| Engine parts | Cylinder,piston,head,equipment sets,camshaft,equipment sets,camshaft,plug,bearings and many others |
| Electrical parts | CDI,regulator,stator coil,start motor,commence relay |
| Brake components | Brake pad,brake footwear,brake caliper,disc,brake pumps |
| Entire body components | Kick lever,gear levers,footstep,shock absorbers,gas tank,seat |
| Transmission | Push chain,sprockets,cam chain,chain lock,wheel hub,and covers |
| Switches | Ignition switches,lock sets,fuel cap,hand switches,fuel cock |
| Provide designs | AKT,ITALIKA,UM,YUNBO,ZENELLA,MOTOMEL,MONDIAL,HangZhou,LIFAN ET |
FAQ:
1. Why select us?
We are specialist in the moto parts company in China mianland. We are self-confident that with our knowledge,good quality,service can give our consumers total gratification.
two. MOQ:
It is amongst one hundred or 200pcs or sets,it depends on the components. For some parts,200pcs is a start,for some large parts,for 50pcs,there is no dilemma.
three.Method of Delilivery
it could be by air,by sea (LCL,FCL) or by express (DHL/UPS/TNT/FEDEX).
we can shipping and delivery it in accordance to your choice.
4. Delivery time:
We could make shipping and delivery inside fifteen or twenty days following your deposit payment. Also it depends on what variety of parts you buy. For some areas,if we have stock,it will be really quick,a single 7 days will be alright.
five. Payment:
we accept T/T payment,L/C and Western union. Really,we use T/T much more,namely by 30% deposit,harmony could be paid before or following loading.
|
US $0.1-0.5 / Piece | |
100 Pieces (Min. Order) |
###
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Type: | Slide Chain |
| Material: | Ruber |
| Certification: | CCC |
| Color: | Black |
###
| Customization: |
Available
|
|---|
###
| Off road parts | For Qingqi GXT200,GXT250,Honda XL125,XR150,Yamaha DT175,XTZ125 Etc |
| Scooter parts | Gy6 50/125/150 scooter parts,AN125,WH125 scooter parts,Keeway scooter parts |
| 2-stroke parts | JOG50 3KJ,AG100,Dio50,MBK,PGT BUXY,PIAGIO TYPHOON,AX100 |
| Bajaj parts | BM150,BM100,Dscover135,Pulsar200,200NS,Platino etc |
| Tricycle parts | 200cc cargo tricycle,250cc/300cc tricycles,and bajaj 3w4s parts,TVS king |
| Engine parts | Cylinder,piston,head,gear sets,camshaft,gear sets,camshaft,plug,bearings etc |
| Electrical parts | CDI,regulator,stator coil,start motor,start relay |
| Brake parts | Brake pad,brake shoes,brake caliper,disc,brake pumps |
| Body parts | Kick lever,gear levers,footstep,shock absorbers,fuel tank,seat |
| Transmission | Drive chain,sprockets,cam chain,chain lock,wheel hub,and covers |
| Switches | Ignition switches,lock sets,fuel cap,hand switches,fuel cock |
| Supply models | AKT,ITALIKA,UM,YUNBO,ZENELLA,MOTOMEL,MONDIAL,SANYA,LIFAN ET |
|
US $0.1-0.5 / Piece | |
100 Pieces (Min. Order) |
###
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Type: | Slide Chain |
| Material: | Ruber |
| Certification: | CCC |
| Color: | Black |
###
| Customization: |
Available
|
|---|
###
| Off road parts | For Qingqi GXT200,GXT250,Honda XL125,XR150,Yamaha DT175,XTZ125 Etc |
| Scooter parts | Gy6 50/125/150 scooter parts,AN125,WH125 scooter parts,Keeway scooter parts |
| 2-stroke parts | JOG50 3KJ,AG100,Dio50,MBK,PGT BUXY,PIAGIO TYPHOON,AX100 |
| Bajaj parts | BM150,BM100,Dscover135,Pulsar200,200NS,Platino etc |
| Tricycle parts | 200cc cargo tricycle,250cc/300cc tricycles,and bajaj 3w4s parts,TVS king |
| Engine parts | Cylinder,piston,head,gear sets,camshaft,gear sets,camshaft,plug,bearings etc |
| Electrical parts | CDI,regulator,stator coil,start motor,start relay |
| Brake parts | Brake pad,brake shoes,brake caliper,disc,brake pumps |
| Body parts | Kick lever,gear levers,footstep,shock absorbers,fuel tank,seat |
| Transmission | Drive chain,sprockets,cam chain,chain lock,wheel hub,and covers |
| Switches | Ignition switches,lock sets,fuel cap,hand switches,fuel cock |
| Supply models | AKT,ITALIKA,UM,YUNBO,ZENELLA,MOTOMEL,MONDIAL,SANYA,LIFAN ET |
Advantages and Disadvantages of Drive Chains
Drive chains are widely used for sliding steel guides. While solution chains are often used, roller chains are more efficient in size and weight. Nevertheless, a drive chain is often the best choice for dirty jobs. The following are some of the benefits and disadvantages of drive chains. Learn more! Adapt your vehicle to your specific situation with drive chains. You’ll be glad you did! Read on to learn more! Continue reading for information on different types of drive chains.
Inverted tooth chain
An inverted tooth camshaft drive chain has teeth on its links and two pin rolling pivot joints that engage each other to transmit moderate to high-speed rotations. This type of drive chain is also known as a silent chain drive, which is particularly effective in reducing noise and vibration. The teeth on the links mesh perfectly with the teeth of the gear sprocket. The inverted tooth design also provides smooth communication of chain links with the teeth of the sprocket.
The design of the new model was particularly effective in quelling noise. The “Druid” spring forks enabled the chain to adjust with minimal motion of the axle. It was launched at the 1910 Olympia show and sold more than 500 units. The drive chain was also silent, which reduced the need for sound insulation and attenuation components, which in turn minimized weight. Hence, it became an ideal choice for wind turbines.
The main disadvantages of chain drive include its low speed and limited range. It is expensive to manufacture and requires precise mounting. Maintenance is essential, including lubrication and slack adjustment. Its velocity fluctuates as the chain is stretched. This causes the chain to fail at the worst possible time. The chain drive also has problems associated with slippage. In addition, it can be prone to excessive wear and tear. Fortunately, however, there are newer types of drive chains available, which are more durable and reliable.
Duplex chain
There are three types of duplex drive chains: SC, RP, and Ramsey. Each has their own unique advantages and features. The Rampower duplex series offers twice the power capacity of the standard SC duplex chain. They are often used in new applications. SC duplex chains are the most affordable and are used in less demanding applications. The SC duplex chain has a lower power capacity but lower weight. There is also no guarantee of performance.
Multi-strand roller chain
The Multiple-strand roller chain for drive chain market can be defined on the basis of the factors that drive growth in this industry. The factors that hamper market growth can be understood in order to come up with alternative bends for lucrative opportunities. This report aims to understand the current scenario and the impact of COVID-19 on the industry as a whole. We will also discuss the market drivers and restraints. We will discuss the various types of Multiple-strand roller chains for drive chain and their market sizes in the coming years.
The minimum tensile strength for a roller chain is one sixth or one-ninth the tensile strength of a conventional drive chain. These standards are established to prevent linkplate fatigue, which is the main cause of premature breakdown. A chain made of this material is considered a superior choice for high-performance applications involving a high load-bearing capacity. If you’re using a drive chain, make sure to choose a proper chain based on the type of application. A simple chain with a high load-bearing capacity is also ideal for simple applications.
While it is true that a high-tension, high-speed drive requires a higher power rating than a low-speed chain, roller chains are primarily used in low to mid-speed applications. They are similar to bicycle chains but may have a master link. In motorcycles, chains are heavier and may require a chain tool to remove. These chains are often replaced with toothed belts or a combination of both.
Flat top chain
The flat top drive chain is a versatile conveyor belt that conveys medium and large workpiece pallets. Its arcing capacity makes it suitable for continuous drive combinations involving curve arcs. The flat top chain is also available with PA wear pads on the workpiece pallets. The flat top chain’s steel and plastic glide profiles allow surface loads of up to 1.5 kg/cm. HD profiles are compatible with the flat top chain.
The steel flat top chain is available in several types: 815, 820, and 881 series. These are heat-treated to have high strength and excellent wear resistance. They can also be used with various sprockets, including 820 sprockets. The high-quality steel chain can be used with many industrial applications. However, if you are looking for a durable chain for your industrial application, iwis hardened stainless steel flat top chains are an excellent choice.
TSplus flat top drive chain offers the most flexibility of any conveying media. The drive units can be linked end-to-end to form extended conveyor lines. Side-flexing flat top chains are available to create serpentine, in-line, and carousel conveyors. Drive units are available in standard and heavy-duty models. They are versatile enough to handle a variety of container sizes. If you need a more complex conveyor system, you can choose a heavy-duty drive chain.
Rexnord flat top chains come in two basic styles: MatTop chain and TableTop chain. The TableTop chain is molded in standard widths ranging from 3.25 inches to 12 inches. These are shipped in ten-foot sections, but you can also find 20-foot-wide mattop chains. You can even customize your MatTop chain to meet your exact needs. They are perfect for a variety of conveying applications, from general conveying to wash down applications.
Conveyor chain
Drive chains for conveyors come in a variety of styles. These chains can have varying degrees of pitch. Pitch is governed by wheel tooth strength, the overall chain rigidity, and the type of drive motor. A normal maximum pitch is determined by the width of the link plates and the angle between the mounting angles. You can increase the pitch of your chain by strengthening the bushes between the link plates. Make sure that the gap between the wheel teeth and the bushes is approximately one-fourth inch.
Pitch and tension of the chain are important considerations when choosing a chain. The minimum pitch is determined by the thickness of the tooth on the wheel and the maximum pitch is determined by the rigidity of the link plates. However, this maximum pitch may be exceeded with bushes between the link plates or clearance with the wheel teeth. A good quality chain will have bearing surfaces lubricated to prevent excessive wear and rust. Medium-viscosity mineral oil is suitable for normal operating conditions. SAE 20W-50 is a good choice for this application. Self-lubricating chains are available from many chain manufacturers.
The chain is usually lubricated by dripping oil between the links. This type of lubrication requires regular inspection of the conveyor chain. The amount of oil should be enough to prevent reddish brown discoloration on the chain joints. A lubricating oil should be applied on a daily basis, according to the manufacturer’s specifications. In order to ensure a longer life for your drive chain, make sure that you lubricate it on a regular basis.
editor by czh 2023-01-09
China Jalyn Motorcycle Parts Motorcycle Spare Parts Motorcycle Chain Fit for Gy6-150 agricultural roller chain
Product Description
Item DESCRIPTION
Solution Identify: Motorcycle Chain
Fit for CG6-150
Merchandise No. 2410099
PACKING & Shipping
Delivery Time: fifteen-thirty Times
Packing: According to Your Requirement.
| SOUTH The united states | BAJAJ BOXER CT100,BAJAJ BOXER BM100,BAJAJ BOXER BM150, BAJAJ PULSAR135, BAJAJ PULSAR1150, BAJAJ PULSAR180, BAJAJ PULSAR200, BAJAJ PULSAR220, BAJAJ DISCOVER125, BAJAJ DISCOVER135, BAJAJ XCD125, BAJAJ 2T 3W, BAJAJ 4T 3W, BAJAJ CALIBER115, HONDA C100 WAVE, HONDA CGL125, HONDA NXR125 BROS, HONDA STORM125CC, HONDA Tornado 250CC, HONDA XLR250-XR250, HONDA XL/XR/NX200, XIHU (WEST LAKE) DIS. JH100-2, XIHU (WEST LAKE) DIS. JH125-6, XIHU (WEST LAKE) DIS. JH150T CHOPPER, XIHU (WEST LAKE) DIS. JL125T SCOOTER, CZPT WIND125, KYMCO ACTIV110, SUZUKI DR200, CZPT XT225, CZPT XTZ125K, YUMBO DAKAR150, YUMBO DAKAR220, CZPT JOG/3KJ50, FT200, TITAN2000, TITAN150, TITAN99, CG125, HJ125-7, GXT200 |
| EUROPE & The usa | CX50, YAMAHA50, AG50, NR50, NRG50, H2o, BUXY50, KATANA50, KATANA70, LEAD50, BALI50 SFX50, SKY, BALJ50, GY6-fifty, GY6-60, GY6-eighty, GY6-150, CX50, DJ50, BUXY50, JOG50, BALI100,NITRO50, NRG LC50, BOOXTER, BWS50, BWS100, DIO50, DIO70, DIO ZX 50, DIO ZX 70, CIAO, PIAGO, AM6, TZR50, HORIZENTAL, CZPT 3KJ, SR50, SR70, AXIS90, AXIS100, DX100, LEAD100, AD50, DERBI, SEPIA, PUCH, PEOGOET103-02, MBK AV7, Vision, OVETTO50, NH80, ROX50, FOX50, MBK AV10, DT50 LC, RZ50LC 88-93, GY6-one hundred fifty, BUXY70, DT125R, BWS70, TB50, T80, DERBI, NH50, MAJESTY125, MAJESTY126, X8-R, COBRA, MOBYLETTE AV10, BERBI SENDA2006, BERBI SENDA2005, SH150, AD50, WH150, TB50, CH250, C100/DY100, JH70, JH110, JH125, CB150, CB200, CG125, YBR125, CG250-OHV, VIPER/ZS200 GS, VINO-50, SYM125 |
| Center EAST | AN125, AN150, MIO125, UZ125, UZ/V125, DIO50 ZX, YP250, MIO150 2V, MIO150 4V, GY6-fifty, GY6-eighty, GY6-125, GY6-a hundred and fifty, JOG50, JOG70, SYM125, SYM150, CG250, CB250, CB150, KVB110, JH70, L110 A, KAB, GS50, VINO 50, BWS50, BWS100, ZY100, ZY125, WH100, WH125, RE205, BAJAJ150, KS4 |
| AFRICA | RX115, RX125, RX135, RXZ135, AX100, YB100, CG125, CG150, CG200, DT125, A100, SY125, AG100, BILP, K90, GK125, CD110, CD110-fifteen, CT100, CB110, AP125-9G, AP150,CB125, CB150,TVS160, RE205 |
| BRAZIL | BIZ125, BROSS150, C70, C100, C100 Aspiration, CARGO125, CB250, CB540E, CBX150, CBX200, CBX250, TWISER, CBX750, CG125, CBX/XRE 300, CG77/91,CG125(FAN2009), CG125 Nowadays TODAS, XY50, XTZ125/YBR125 Aspect 2009-2011, TITAN150, TITAN2000, TITAN2004, WEB100, XL125, XL150, ML/TUR83/XL 250, XLR125, XLS125, XLS250R, XR250 TORNADO2007-2008, XR200, XR200R, XT225, XTZ125,XTZ250 LANDER2007-2008, DAFRA Tremendous one hundred, DAFRA SPEED150, DT125, KANSAS150, MAX125, LEAD110, NX4 FACCOM2006 STE 2008, NX150, NXR150, NX350 SHAR 1991 , PHOENIX, POP100(WAVE100), RD125/one hundred thirty five, SUZUKI YES125, YS250 FAZER2006, TITAN99,KS/ES 02/05/Enthusiast/NXR, TW/TR 250, SHINNERAY50, MOPED, NEO 115 YAMAHA, CRF230 |
| ARGENTINA | GXT200, C70, DAX70, C90, C100, C110, CD110, MAX110, CG200, HJ200, CG150, HJ150, CG125, HJ125, GY6-fifty, GY6-60, GY6-80, GY6-a hundred, SCOOTER125, GY6-one hundred twenty five, SCOOTER150, GY6-one hundred fifty, WAVE110, NX200, CBX200, TITAN150, TITAN99, TITAN2000, RX100, YBR125, HONDA NXR125 BRPSS, HONDA STROM125, WAVE110, GILERA SMASH |
| MEXICO | LIFAN110, WAVE110, AT110, DINAMO APRISA one hundred ten, C110, ITALIKA FT125 CG125, ITALIKA FT150 CG150, TITAN2000, GY6-one hundred twenty five CS125 DS125, GY6-one hundred fifty DS150, ST70 APRISA ZANETTI 70CC, HONDA C90, HONDA BROSS125, HONDA BROSS150, HONDA XR200, CG200, HONDA CARGO125, HONDA CARGO150, TITAN150, YBR125, CARPTON |
| COLUMBIA | LIBERO, LB50, MT90/V50, PULSAR, FC80, RJ/STORM, RG100,RX100,RX115, RX125, RX135, RXK, SMASH110, SONIC 2003/2004, STROM, SUPRA, T50, TENA, TIGER, TITAN99, TITAN150, TR125, TS100, TS125E, TS100ERZ, TS185ERZ, WAVE, V50, V80, WY147, XF90, XF125, XL125, XL185, XR200, XRM, CZPT BWS125, YBR125, AKT110, AK125, AKT125, AX100, AXIS90, JOG90, PULSAR135, BOXER CT100, C50, C70, C90, C100, C110, CARGO125, CARGO150, CBF150, SUPER135, CD100, BIZ, CG125, CG150, EN125, AX125, CM125, CRYPTON, CUB, Uncover, DT125, DT125K, DT175K, DY90, DY100, ECO, EM125, EN125, FD115, FR50, FR80, CAS, GD116, GD125, GL-one hundred twenty five, GLX50, GLX90, GN125, GN125H, GRAND, GS125, GSX, GY6-one hundred fifty, GY6-200, HERO, HONDA WAVE, HONDA CB150, JD100, JH70, JH150, K90, LEAD90, GSD-sixteen |
| TURKEY | CUB, CUB LIF3VALF, CUB110, CG125, CG150, CG200, CG250, YBR125, ACTIVA, SCT125, SCT150, FIZY, SPACY, CBF125, CBF150, GY6-fifty, GY6-one hundred twenty five, GY6-150, WH100, WH125, AN125, CD70, CD100, CD110, WAVE110, CY GNUS RS125, C110, CM125 |
| RUSSIA | JH50, JH70, JH90, JH100, JH110, GY6-50, GY6-sixty, GY6-70, GY6-80, GY6-a hundred, GY6-one hundred twenty five, GY6-one hundred fifty, GY6-one hundred seventy five, GY6-200, TB50, TB60, TB65, AD50, AD65, DIO50, DIO65, ZX50, ZX65, TACT50, TACT60, JOG50, JOG65, JOG90, AXIS90, LEAD50, LEAD90, LEAD100, AF18, AF24, AF28, AF34, AF35, AF36, CG125, CBT125, CB125, CB150, CB200, CB250, STORM125, DELTA110, APLHA110, CBB200, CBB250, ZODIAK, SIGMA125 |
| OTHER Country | CG125, CG150, CG200, JH7O, JH90, JH100, JH110, WAVE110, GY6-one hundred twenty five, GY6-150, JOG50, CBX150, NX150, PULSAR180, NXR125, RXS115 BAJAJ BOXER CT100, BAJAJ BOXER BM100, BAJAJ BOXER BM150, BAJAJ PULSAR135, BAJAJ PULSAR150, BAJAJ PULSAR180, BAJAJ PULSAR200, BAJAJ PULSAR220, BAJAJ DISCOVER125, BAJAJ DISCOVER135 BAJAJ XCD125, BAJAJ 2T 3W, BAJAJ 4T 3W |
Business PROFILE AND FAXIHU (WEST LAKE) DIS.TIES
We are the only suggested business of motorcycle areas & components in China by CCCM
(China Chamber Of Commerce For Motorbike, chinajalyn). It’s a high reputation offered by China government.
*As the market leader of expert suppliers in Motorbike/Bicycle/ATV/Scooter components subject in China, we have our own R&D base,warehouse and 1 quit source showroom with 15000 sq. toes.
*We have an experience for over sixteen many years in exporting and creating almost all sorts of elements for bike, dust, scooters,ATVs, Bikes and components with near 20,000 types.
*We have near 700 suppliers with great popularity ,very good high quality and aggressive price tag.
JALYN Team
FAIRS
We consider element in Motorbike/ATV/Bicycle spare components and equipment in domestic China and abroad every single yr to expand our sales and service
To know much more about us pls kindly check out our internet site: chinajalyn
FAQ
1. When can I get the price tag?
Re:The quotation must be given inside of 24 hrs .
If it is extremely urgent, You should make an emphasis by remarks.
2. How to get the greatest cost from JALYN?
Re: The bulk order value can be negotiated.
We will quote the lastest greatest price tag according to the buyer last acquire listing.
2.How can I get a sample to examine your good quality?
Re: Most sample could be totally free for you , you want just to pay out the freight to your spot.
Normally, the sample will be sent inside of 1 week. It relies upon on the stock.
three. Can you do the packages as we need?
Indeed. Absolutely ! we can do OEM Package for you.
Just send out me your detail ask for,we can design and style the package for you.
four.What is your MOQ?
Re: For the spare parts and add-ons, it would count on the comprehensive merchandise.
five.What is your supply time?
Re:Generally 15-30 days for motorbike ATV Scooter and Bike Parts and components once your buy positioned.
Generally talking, we propose that you begin inquiry 2 months prior to the day you would like to get the items at your nation.
6.What is your payment?
Re: We take T/T and L/C.
You can select the 1 which is the most convenient or value efficient for you.
seven.What’s your transportation?
Re:By air,by sea(LCL,FCL).
If anything at all else that you want to know ,you should get in touch with us.
Many thanks for reading through our introduction!
| To Be Negotiated | 500 Pieces (Min. Order) |
###
| Type: | Motorcycle Chain |
|---|---|
| Certification: | ISO9001: 2000, CCC, CE, RoHS, DOT, EEC |
| Product Name: | Motorcycle Chain |
| Model: | Gy6-150 |
| Item No.: | 2410099 |
| Brand: | Jalyn |
###
| Customization: |
Available
|
|---|
###
| SOUTH AMERICA | BAJAJ BOXER CT100,BAJAJ BOXER BM100,BAJAJ BOXER BM150, BAJAJ PULSAR135, BAJAJ PULSAR1150, BAJAJ PULSAR180, BAJAJ PULSAR200, BAJAJ PULSAR220, BAJAJ DISCOVER125, BAJAJ DISCOVER135, BAJAJ XCD125, BAJAJ 2T 3W, BAJAJ 4T 3W, BAJAJ CALIBER115, HONDA C100 WAVE, HONDA CGL125, HONDA NXR125 BROS, HONDA STORM125CC, HONDA TWISTER 250CC, HONDA XLR250-XR250, HONDA XL/XR/NX200, JIALING JH100-2, JIALING JH125-6, JIALING JH150T CHOPPER, JIALING JL125T SCOOTER, KAWASAKI WIND125, KYMCO ACTIV110, SUZUKI DR200, YAMAHA XT225, YAMAHA XTZ125K, YUMBO DAKAR150, YUMBO DAKAR220, YAMAHA JOG/3KJ50, FT200, TITAN2000, TITAN150, TITAN99, CG125, HJ125-7, GXT200 |
| EUROPE & AMERICA | CX50, YAMAHA50, AG50, NR50, NRG50, WATER, BUXY50, KATANA50, KATANA70, LEAD50, BALI50 SFX50, SKY, BALJ50, GY6-50, GY6-60, GY6-80, GY6-150, CX50, DJ50, BUXY50, JOG50, BALI100,NITRO50, NRG LC50, BOOXTER, BWS50, BWS100, DIO50, DIO70, DIO ZX 50, DIO ZX 70, CIAO, PIAGO, AM6, TZR50, HORIZENTAL, YAMAHA 3KJ, SR50, SR70, AXIS90, AXIS100, DX100, LEAD100, AD50, DERBI, SEPIA, PUCH, PEOGOET103-02, MBK AV7, VISION, OVETTO50, NH80, ROX50, FOX50, MBK AV10, DT50 LC, RZ50LC 88-93, GY6-150, BUXY70, DT125R, BWS70, TB50, T80, DERBI, NH50, MAJESTY125, MAJESTY126, X8-R, COBRA, MOBYLETTE AV10, BERBI SENDA2006, BERBI SENDA2005, SH150, AD50, WH150, TB50, CH250, C100/DY100, JH70, JH110, JH125, CB150, CB200, CG125, YBR125, CG250-OHV, VIPER/ZS200 GS, VINO-50, SYM125 |
| MIDDLE EAST | AN125, AN150, MIO125, UZ125, UZ/V125, DIO50 ZX, YP250, MIO150 2V, MIO150 4V, GY6-50, GY6-80, GY6-125, GY6-150, JOG50, JOG70, SYM125, SYM150, CG250, CB250, CB150, KVB110, JH70, L110 A, KAB, GS50, VINO 50, BWS50, BWS100, ZY100, ZY125, WH100, WH125, RE205, BAJAJ150, KS4 |
| AFRICA | RX115, RX125, RX135, RXZ135, AX100, YB100, CG125, CG150, CG200, DT125, A100, SY125, AG100, BILP, K90, GK125, CD110, CD110-15, CT100, CB110, AP125-9G, AP150,CB125, CB150,TVS160, RE205 |
| BRAZIL | BIZ125, BROSS150, C70, C100, C100 DREAM, CARGO125, CB250, CB540E, CBX150, CBX200, CBX250, TWISER, CBX750, CG125, CBX/XRE 300, CG77/91,CG125(FAN2009), CG125 TODAY TODAS, XY50, XTZ125/YBR125 FACTOR 2009-2011, TITAN150, TITAN2000, TITAN2004, WEB100, XL125, XL150, ML/TUR83/XL 250, XLR125, XLS125, XLS250R, XR250 TORNADO2007-2008, XR200, XR200R, XT225, XTZ125,XTZ250 LANDER2007-2008, DAFRA SUPER 100, DAFRA SPEED150, DT125, KANSAS150, MAX125, LEAD110, NX4 FACCOM2006 STE 2008, NX150, NXR150, NX350 SHAR 1991 , PHOENIX, POP100(WAVE100), RD125/135, SUZUKI YES125, YS250 FAZER2006, TITAN99,KS/ES 02/05/FAN/NXR, TW/TR 250, SHINNERAY50, MOPED, NEO 115 YAMAHA, CRF230 |
| ARGENTINA | GXT200, C70, DAX70, C90, C100, C110, CD110, MAX110, CG200, HJ200, CG150, HJ150, CG125, HJ125, GY6-50, GY6-60, GY6-80, GY6-100, SCOOTER125, GY6-125, SCOOTER150, GY6-150, WAVE110, NX200, CBX200, TITAN150, TITAN99, TITAN2000, RX100, YBR125, HONDA NXR125 BRPSS, HONDA STROM125, WAVE110, GILERA SMASH |
| MEXICO | LIFAN110, WAVE110, AT110, DINAMO APRISA 110, C110, ITALIKA FT125 CG125, ITALIKA FT150 CG150, TITAN2000, GY6-125 CS125 DS125, GY6-150 DS150, ST70 APRISA ZANETTI 70CC, HONDA C90, HONDA BROSS125, HONDA BROSS150, HONDA XR200, CG200, HONDA CARGO125, HONDA CARGO150, TITAN150, YBR125, CARPTON |
| COLUMBIA | LIBERO, LB50, MT90/V50, PULSAR, FC80, RJ/STORM, RG100,RX100,RX115, RX125, RX135, RXK, SMASH110, SONIC 2003/2004, STROM, SUPRA, T50, TENA, TIGER, TITAN99, TITAN150, TR125, TS100, TS125E, TS100ERZ, TS185ERZ, WAVE, V50, V80, WY147, XF90, XF125, XL125, XL185, XR200, XRM, YAMAHA BWS125, YBR125, AKT110, AK125, AKT125, AX100, AXIS90, JOG90, PULSAR135, BOXER CT100, C50, C70, C90, C100, C110, CARGO125, CARGO150, CBF150, SUPER135, CD100, BIZ, CG125, CG150, EN125, AX125, CM125, CRYPTON, CUB, DISCOVER, DT125, DT125K, DT175K, DY90, DY100, ECO, EM125, EN125, FD115, FR50, FR80, CAS, GD116, GD125, GL-125, GLX50, GLX90, GN125, GN125H, GRAND, GS125, GSX, GY6-150, GY6-200, HERO, HONDA WAVE, HONDA CB150, JD100, JH70, JH150, K90, LEAD90, GSD-16 |
| TURKEY | CUB, CUB LIF3VALF, CUB110, CG125, CG150, CG200, CG250, YBR125, ACTIVA, SCT125, SCT150, FIZY, SPACY, CBF125, CBF150, GY6-50, GY6-125, GY6-150, WH100, WH125, AN125, CD70, CD100, CD110, WAVE110, CY GNUS RS125, C110, CM125 |
| RUSSIA | JH50, JH70, JH90, JH100, JH110, GY6-50, GY6-60, GY6-70, GY6-80, GY6-100, GY6-125, GY6-150, GY6-175, GY6-200, TB50, TB60, TB65, AD50, AD65, DIO50, DIO65, ZX50, ZX65, TACT50, TACT60, JOG50, JOG65, JOG90, AXIS90, LEAD50, LEAD90, LEAD100, AF18, AF24, AF28, AF34, AF35, AF36, CG125, CBT125, CB125, CB150, CB200, CB250, STORM125, DELTA110, APLHA110, CBB200, CBB250, ZODIAK, SIGMA125 |
| OTHER COUNTRY | CG125, CG150, CG200, JH7O, JH90, JH100, JH110, WAVE110, GY6-125, GY6-150, JOG50, CBX150, NX150, PULSAR180, NXR125, RXS115 BAJAJ BOXER CT100, BAJAJ BOXER BM100, BAJAJ BOXER BM150, BAJAJ PULSAR135, BAJAJ PULSAR150, BAJAJ PULSAR180, BAJAJ PULSAR200, BAJAJ PULSAR220, BAJAJ DISCOVER125, BAJAJ DISCOVER135 BAJAJ XCD125, BAJAJ 2T 3W, BAJAJ 4T 3W |
| To Be Negotiated | 500 Pieces (Min. Order) |
###
| Type: | Motorcycle Chain |
|---|---|
| Certification: | ISO9001: 2000, CCC, CE, RoHS, DOT, EEC |
| Product Name: | Motorcycle Chain |
| Model: | Gy6-150 |
| Item No.: | 2410099 |
| Brand: | Jalyn |
###
| Customization: |
Available
|
|---|
###
| SOUTH AMERICA | BAJAJ BOXER CT100,BAJAJ BOXER BM100,BAJAJ BOXER BM150, BAJAJ PULSAR135, BAJAJ PULSAR1150, BAJAJ PULSAR180, BAJAJ PULSAR200, BAJAJ PULSAR220, BAJAJ DISCOVER125, BAJAJ DISCOVER135, BAJAJ XCD125, BAJAJ 2T 3W, BAJAJ 4T 3W, BAJAJ CALIBER115, HONDA C100 WAVE, HONDA CGL125, HONDA NXR125 BROS, HONDA STORM125CC, HONDA TWISTER 250CC, HONDA XLR250-XR250, HONDA XL/XR/NX200, JIALING JH100-2, JIALING JH125-6, JIALING JH150T CHOPPER, JIALING JL125T SCOOTER, KAWASAKI WIND125, KYMCO ACTIV110, SUZUKI DR200, YAMAHA XT225, YAMAHA XTZ125K, YUMBO DAKAR150, YUMBO DAKAR220, YAMAHA JOG/3KJ50, FT200, TITAN2000, TITAN150, TITAN99, CG125, HJ125-7, GXT200 |
| EUROPE & AMERICA | CX50, YAMAHA50, AG50, NR50, NRG50, WATER, BUXY50, KATANA50, KATANA70, LEAD50, BALI50 SFX50, SKY, BALJ50, GY6-50, GY6-60, GY6-80, GY6-150, CX50, DJ50, BUXY50, JOG50, BALI100,NITRO50, NRG LC50, BOOXTER, BWS50, BWS100, DIO50, DIO70, DIO ZX 50, DIO ZX 70, CIAO, PIAGO, AM6, TZR50, HORIZENTAL, YAMAHA 3KJ, SR50, SR70, AXIS90, AXIS100, DX100, LEAD100, AD50, DERBI, SEPIA, PUCH, PEOGOET103-02, MBK AV7, VISION, OVETTO50, NH80, ROX50, FOX50, MBK AV10, DT50 LC, RZ50LC 88-93, GY6-150, BUXY70, DT125R, BWS70, TB50, T80, DERBI, NH50, MAJESTY125, MAJESTY126, X8-R, COBRA, MOBYLETTE AV10, BERBI SENDA2006, BERBI SENDA2005, SH150, AD50, WH150, TB50, CH250, C100/DY100, JH70, JH110, JH125, CB150, CB200, CG125, YBR125, CG250-OHV, VIPER/ZS200 GS, VINO-50, SYM125 |
| MIDDLE EAST | AN125, AN150, MIO125, UZ125, UZ/V125, DIO50 ZX, YP250, MIO150 2V, MIO150 4V, GY6-50, GY6-80, GY6-125, GY6-150, JOG50, JOG70, SYM125, SYM150, CG250, CB250, CB150, KVB110, JH70, L110 A, KAB, GS50, VINO 50, BWS50, BWS100, ZY100, ZY125, WH100, WH125, RE205, BAJAJ150, KS4 |
| AFRICA | RX115, RX125, RX135, RXZ135, AX100, YB100, CG125, CG150, CG200, DT125, A100, SY125, AG100, BILP, K90, GK125, CD110, CD110-15, CT100, CB110, AP125-9G, AP150,CB125, CB150,TVS160, RE205 |
| BRAZIL | BIZ125, BROSS150, C70, C100, C100 DREAM, CARGO125, CB250, CB540E, CBX150, CBX200, CBX250, TWISER, CBX750, CG125, CBX/XRE 300, CG77/91,CG125(FAN2009), CG125 TODAY TODAS, XY50, XTZ125/YBR125 FACTOR 2009-2011, TITAN150, TITAN2000, TITAN2004, WEB100, XL125, XL150, ML/TUR83/XL 250, XLR125, XLS125, XLS250R, XR250 TORNADO2007-2008, XR200, XR200R, XT225, XTZ125,XTZ250 LANDER2007-2008, DAFRA SUPER 100, DAFRA SPEED150, DT125, KANSAS150, MAX125, LEAD110, NX4 FACCOM2006 STE 2008, NX150, NXR150, NX350 SHAR 1991 , PHOENIX, POP100(WAVE100), RD125/135, SUZUKI YES125, YS250 FAZER2006, TITAN99,KS/ES 02/05/FAN/NXR, TW/TR 250, SHINNERAY50, MOPED, NEO 115 YAMAHA, CRF230 |
| ARGENTINA | GXT200, C70, DAX70, C90, C100, C110, CD110, MAX110, CG200, HJ200, CG150, HJ150, CG125, HJ125, GY6-50, GY6-60, GY6-80, GY6-100, SCOOTER125, GY6-125, SCOOTER150, GY6-150, WAVE110, NX200, CBX200, TITAN150, TITAN99, TITAN2000, RX100, YBR125, HONDA NXR125 BRPSS, HONDA STROM125, WAVE110, GILERA SMASH |
| MEXICO | LIFAN110, WAVE110, AT110, DINAMO APRISA 110, C110, ITALIKA FT125 CG125, ITALIKA FT150 CG150, TITAN2000, GY6-125 CS125 DS125, GY6-150 DS150, ST70 APRISA ZANETTI 70CC, HONDA C90, HONDA BROSS125, HONDA BROSS150, HONDA XR200, CG200, HONDA CARGO125, HONDA CARGO150, TITAN150, YBR125, CARPTON |
| COLUMBIA | LIBERO, LB50, MT90/V50, PULSAR, FC80, RJ/STORM, RG100,RX100,RX115, RX125, RX135, RXK, SMASH110, SONIC 2003/2004, STROM, SUPRA, T50, TENA, TIGER, TITAN99, TITAN150, TR125, TS100, TS125E, TS100ERZ, TS185ERZ, WAVE, V50, V80, WY147, XF90, XF125, XL125, XL185, XR200, XRM, YAMAHA BWS125, YBR125, AKT110, AK125, AKT125, AX100, AXIS90, JOG90, PULSAR135, BOXER CT100, C50, C70, C90, C100, C110, CARGO125, CARGO150, CBF150, SUPER135, CD100, BIZ, CG125, CG150, EN125, AX125, CM125, CRYPTON, CUB, DISCOVER, DT125, DT125K, DT175K, DY90, DY100, ECO, EM125, EN125, FD115, FR50, FR80, CAS, GD116, GD125, GL-125, GLX50, GLX90, GN125, GN125H, GRAND, GS125, GSX, GY6-150, GY6-200, HERO, HONDA WAVE, HONDA CB150, JD100, JH70, JH150, K90, LEAD90, GSD-16 |
| TURKEY | CUB, CUB LIF3VALF, CUB110, CG125, CG150, CG200, CG250, YBR125, ACTIVA, SCT125, SCT150, FIZY, SPACY, CBF125, CBF150, GY6-50, GY6-125, GY6-150, WH100, WH125, AN125, CD70, CD100, CD110, WAVE110, CY GNUS RS125, C110, CM125 |
| RUSSIA | JH50, JH70, JH90, JH100, JH110, GY6-50, GY6-60, GY6-70, GY6-80, GY6-100, GY6-125, GY6-150, GY6-175, GY6-200, TB50, TB60, TB65, AD50, AD65, DIO50, DIO65, ZX50, ZX65, TACT50, TACT60, JOG50, JOG65, JOG90, AXIS90, LEAD50, LEAD90, LEAD100, AF18, AF24, AF28, AF34, AF35, AF36, CG125, CBT125, CB125, CB150, CB200, CB250, STORM125, DELTA110, APLHA110, CBB200, CBB250, ZODIAK, SIGMA125 |
| OTHER COUNTRY | CG125, CG150, CG200, JH7O, JH90, JH100, JH110, WAVE110, GY6-125, GY6-150, JOG50, CBX150, NX150, PULSAR180, NXR125, RXS115 BAJAJ BOXER CT100, BAJAJ BOXER BM100, BAJAJ BOXER BM150, BAJAJ PULSAR135, BAJAJ PULSAR150, BAJAJ PULSAR180, BAJAJ PULSAR200, BAJAJ PULSAR220, BAJAJ DISCOVER125, BAJAJ DISCOVER135 BAJAJ XCD125, BAJAJ 2T 3W, BAJAJ 4T 3W |
Roller Chain Maintenance Tips
There are many things to keep in mind when maintaining a roller chain. The main reasons include friction and external influences. Without proper lubrication and adjustment, such chains will wear prematurely. Here are some tips for keeping your roller chain in top shape. continue reading! This will make your process easier. We will also discuss the cost of the new roller chain. As always, remember to check for loose ends and adjust the chain regularly.
Preloading
Roller chains are designed to accommodate many different types of loads. Sprockets are the main cause of chain wear. Axial and angular misalignment occurs when the sprocket faces are not properly aligned. Both types of misalignment increase stress and wear on the roller chain. They can also negatively affect the drive. Therefore, choosing the right chain is an important consideration.
Preloading helps to eliminate initial elongation and extend service life. The benefits of preloading can be seen in the preloading chart. Significant elongation occurs during drive startup with no or minimal preload. This is due to the surface hardness of the worn parts. On the other hand, a properly preloaded chain shows little elongation during the initial start. Therefore, proper preload can prolong wear life.
Although elongation is a natural phenomenon in any drive, it can be minimized or eliminated with proper maintenance. In addition to regular inspections, you should do a full inspection of your chain after the first hundred hours. This inspection should focus on key life factors such as 3% elongation, how the chain is lubricated, and any other issues that may affect life. A good quality chain should have the longest life and no problems.
There are many different roller chain specifications. A good rule of thumb is to choose chains with at least five links. Then, tighten the chain until a break occurs, and it will tell you what kind of break occurred. Alternatively, you can use a roller chain with the maximum allowable load. As long as the MAL doesn’t exceed that number, it’s still perfectly safe to use it for any application.
lubricating
When it comes to lubrication, there are several different techniques. For example, spray lubrication is a popular method for high-horsepower drives and high-load and fast-moving machines. This method is very effective, but it is expensive, and spraying the chain too far out of the guard can cause leaks. Another common method is brush lubrication. Brush lubrication involves applying a continuous flow of oil to the chain, pushing it into the chain. This lubrication technique reduces the application temperature of the chain. Also, it can extend the life of the chain, depending on the manufacturer’s specifications.
While the lubrication of roller chain couplings varies by application, sprocket hubs should be lubricated monthly to ensure proper sealing. The amount of oil used depends on the rotational speed and the type of roller chain coupling. In general, lubricants used in roller chain couplings should have excellent adhesion, oxidation, and mechanical stability.
Wear-resistant lubricants are recommended. They prevent the rollers from sticking to each other and prevent rusting. These lubricants have low surface tension and are not harmful to metal or O-ring chains. The optimum lubrication method depends on ambient temperature, horsepower, and chain speed. Properly lubricating a roller chain increases the life of the chain and reduces the risk of wear.
Proper lubrication of the roller chain is essential to prevent corrosion and prolong its service life. The oil forms a smooth film on the chain components, reducing metal-to-metal contact and minimizing friction and wear. Additionally, the oil provides a smooth running surface and reduces noise. However, the running-in process of roller chain lubrication cannot be underestimated. When using heavy-duty oils, ensure that the lubricant is compatible with operating and ambient temperatures.
Maintain
To extend the life of your roller chain, you need to carry out regular inspections. First, you should check the T-pin on the link plate at the joint. If they are not connected properly, it can cause the chain to stretch and not maintain proper spacing and timing. Next, you should look for unusual noise, corrosion, and dirt that may indicate wear. If you notice any of these problems, it’s time to replace the chain.
In order to properly maintain a roller chain, both areas of the roller chain must be lubricated with the correct lubricant. Lubricants used should be SAE non-degreased oils. There are several types of lubricants available, but the best one is a petroleum-based oil with a high viscosity. You can also check for signs of wear, such as red or brown discoloration. This means that there is not enough lubrication.
While the life expectancy of a roller chain is unknown, it is important to know how to extend its life and maximize its effectiveness. Improper tension and alignment can shorten its life and place undue stress on the drive system and the chain itself. Incorrect tension can also lead to slippage and increased energy output. Therefore, you should calculate the tension and alignment of the chain during the initial installation. Check and adjust regularly.
Another way to extend the life of your rollers is to thoroughly clean the inside and outside of the rollers. You should also lubricate it frequently to prevent excessive heat buildup. Designed to prevent overheating by limiting the amount of work during break-ins. Additionally, regular inspections will help you catch anomalies early enough to stop operations. Last but not least, regular lubrication will prolong the life of the roller chain.
Cost
Buying a roller chain is a big decision, but initial cost shouldn’t be the only consideration. The cost of the roller chain itself, as well as the running costs, should be considered. Even the lowest-priced chains can be more expensive in the long run. Additionally, maintenance and energy costs may increase. The best roller chain for your business will be the one that best suits your needs. Listed below are some considerations to consider when purchasing a roller chain.
First, what material should you use? Roller chains come in many different materials. Stainless steel is a commonly used material in construction. Materials are selected based on the cost and design of chain horsepower transmission. Various manufacturing processes will determine which material is suitable for your application. Also, the weight of the chain will vary depending on its pitch and the construction technique used. A large part of the cost of a roller chain is on the drive sprocket.
Another consideration is installation cost. Roller chains are commonly used in agricultural and transportation applications, especially for agronomic products. If lubrication is your concern, maintenance-free chains are the best choice. Corrosion-resistant chains are ideal for wet environments. They are sold in boxed lengths, so replacing a longer length requires adding a shorter length. To avoid trouble, use the skateboard to help connect the links.
Another consideration is the overall width. The overall width of an open #40 roller chain may vary but should be at least 10 feet wide. Although it is not the most expensive type of roller chain, it will last longer. Using it correctly will increase its overall longevity, so it’s a good idea to choose it wisely. If your business uses roller chains regularly, the cost reduction is well worth it.
Application
A roller chain consists of a pair of alternating pins and roller links. The pins are pressed into the side panels and hinged to the rollers. Roller chains can be single or multi-strand, connected by a common pin. The multi-strand design provides higher shear strength for demanding power transmission applications. Typical applications for roller chains include conveyors, hoists, and other mechanical equipment.
The horsepower capability of a roller chain is limited by several factors, including pin shock and friction. While research into these factors has placed some limits on the maximum operating speed of the roller chain, practical experience has shown that these systems can be used at higher speeds. Proper lubrication and cooling can increase the durability of these chains. In addition, roller chain applications include:
Drive and conveyor systems are the two main uses of roller chains. During driving operations, wear and elongation are a natural part of the operation. However, lubrication plays a vital role in minimizing wear and shock loads. Therefore, wear is inevitable and special care must be taken to ensure proper lubrication. Additionally, lubrication reduces heat dissipation in the chain.
The materials used to make roller chains vary from one type to another. Stainless steel is common, but nylon or brass are sometimes used. These materials are less expensive and more durable than steel or stainless steel. The best material for the job depends on a variety of factors, including cost, environmental conditions, and design horsepower transmission. For example, the pin bushing contact area is a critical area requiring lubrication. Additionally, some coatings are designed to retard the corrosive effects of water or oil.
editor by czh 2023-01-03
China Professional Aluminum Sprocket for Motorcycle Kit with Without Key ANSI Pitch Lightweight Metric Roller Chain Tooth Speed Bike Freewheel Conveyor Electric Scooter Sprocket near me supplier
Item Description
Aluminum Sprocket For Motorbike Kit With Without having Essential ANSI Pitch Lightweight Metric Roller Chain Tooth Pace Bicycle Freewheel Conveyor Electrical Scooter Sprocket
Producer of Sprocket, Chain sprockets, wheel and sprocket, push sprocket, sprocket wheel, taper lock sprocket, gear sprocket, idle sprocket, bike sprocket and stainless metal sprocket, can interchange and replace with martin dimension sprocket, jt measurement sprockets, did dimension chain sprocket and so on.
What is a drive chain?
A drive chain is a wheeled device that transmits power from one gear to another. The drive chain is usually an oval ring around a corner or worm gear. On the other hand, idler pulleys do not transmit power and are not used to move the chain. In some cases, drive chains can be used with idler pulleys to transport objects. This allows the drive chain to recover some power from the second gear.
conveyor chain
There are many types of conveyor chains to choose from. One type is a closed joint chain. It consists of the barrel and connecting rod, made from a single casting and heat-treated for high strength and durability. Conveyor chains typically have low running speeds and are typically made of malleable iron. Another type of chain is the power transmission chain, which is used to transmit mechanical power. They feature efficient lubrication and are stronger than conventional conveyor chains.
Roller chain pitches can range from half an inch to a third of an inch. They are available in steel and nickel-plated steel. They can be used with inline or staggered rollers and can be designed with different pitch levels. They can also have bushings between the chainplates or gaps between the teeth to increase their maximum spacing. When choosing a conveyor chain, remember to properly lubricate bearing surfaces to minimize power absorption, wear, and corrosion. Mineral oils of medium viscosity are suitable for normal operating temperatures. SAE 20W50 is suitable. Manufacturers also offer self-lubricating chains.
Conveyor chains are used in many industries. The automotive industry has traditionally used these chains for bulk transport. Their reliability and low cost make them an excellent choice for a variety of applications. CZPT Chains offers stainless steel and CZPT conveyor chains to meet your unique requirements. If you’re in the market for a new conveyor, don’t forget to shop around. CZPT Chain can help you find the perfect one.
The regular drive version consists of an ASME/ANSI roller chain wrapped around a driven sprocket. It can also be configured for variable rpm. The gear ratio between the two parts determines the reduction or increase in speed. In some cases, solution chains can be used. Roller chains are more efficient. Then, there are solutions for both cases. There are many types of conveyor chains to choose from.
Conveyor chain pitch also plays an important role in performance. The smaller the pitch of the chain, the faster it spins. On the other hand, a smaller pitch will require more teeth on the sprocket, which means more links will be engaged during the movement. This smaller articulation angle also produces smoother motion. It also reduces vibration. Therefore, CZPT Chains can be trusted for a long time.
roller chain
The performance of a drive chain depends on how well it is maintained and lubricated. Careful attention to detail is required when selecting a roller chain, which is one of the most important components in a drive chain. Its proper lubrication and assembly will significantly affect its wear life. Here are some important tips to follow when buying a roller chain:
The size of the drive chain should be selected according to the sprockets used. The large sprocket should have at least 25 teeth, and the small sprocket should have fewer teeth. The pitch of a drive chain is the contact angle between the chain and the sprocket. The smaller the sprocket, the smaller the contact angle of the two parts. Larger sprockets are better, but smaller sprockets must never have fewer teeth.
When purchasing a roller chain, be sure to consider the maximum speed of the small sprocket. This will determine how much lubrication you need. Different lubrication systems have different requirements. Manual lubrication limits how many feet per minute the drive chain can run, while oil bath lubrication can get you up to 1100 ft/min. The only way to maximize drive chain speed is to purchase a pump lubrication system.
Once you have the right length, you can determine if you need a new one. To do this you have to move the axis to measure the length. Once the length is determined, the drive chain should be removed from the sprocket and measured using the ANSI specified measuring load. You should also follow safety guidelines when measuring your chain. If you want to maximize the life of your drive chain, be sure to follow these tips.
Another important consideration is the type of environment you operate in. For applications that need to avoid rubbing steel rails, it is best to use a roller chain that can withstand a clean indoor environment. Although roller chains are generally more durable, they must be stored properly to avoid corrosion. If you care about the environment, consider opting for double chain. Its durability and low maintenance costs will make it a valuable investment in your business.
closed pivot
Closed-end pivot drive chains are used in a variety of applications. They are known for their durability, high strength, and long life. They are available in a variety of grades, including grade 400, grade 600, and grade 800 pivots, which can withstand the high forces required for certain applications. Enclosed pivot chains can be used to lift, pull, convey and transfer heavy loads.
Class 400 closed-end pivot chain features one-piece cast offset link construction. Steel pins connect each link and are prevented from rotating by head stops. This design allows the pin to connect inside the barrel without breaking. This type of chain is the most commonly used and has the highest durability. In addition to being extremely durable, it offers long-lasting performance and smooth operation.
Another closed-end pivot conveyor chain drive is called a power drive chain. These chains consist of barrels and links used to transmit rotation from one shaft to another. The barrels of the closed-end pivot chains are made of steel, which allows them to run easily on the sprockets. Block drive chains are used for low-speed applications, but they can be noisy when the chain is in contact with the sprockets.
The enclosed pivot drive chain has rollers on both ends to minimize wear. These chains are usually made of steel and can be used in areas where high-speed power transmission is required. They are also available in heavy-duty versions. Unlike other types of chains, steel pivot chains are designed for a variety of applications. They are suitable for heavy-duty applications and their open barrel design allows for minimal contact with the pins in the barrel and the root of the sprocket.
Linear chain
CZPT is an important part of linear drive technology. This type of chain is capable of delivering real power in tight spaces. Typically, loads are moved by pulling or pushing. CZPT can perform both types of movements. They can push and pull additional loads. This type of chain can also be wound and stored in the magazine. It is a popular choice for small machine tools and many other uses.
Unlike traditional mechanical chains, CZPT uses a push-pull strategy to move heavy objects. It is a rigid locking design that prevents kinking and allows the chain to transmit force without bending. The CZPT is an excellent choice for moving large loads and is particularly versatile in power transmission. However, CZPT is more expensive than traditional drive chain options.
The service life of a linear chain depends on its design, material type and size. You may want to buy a good quality chain, but it’s not necessary in all cases. While superior quality can extend the life of the chain, it may not be necessary for low-speed drives or very light shock loads. If you’re not dealing with high-velocity shock loads, you probably don’t need features like oil reservoirs or bushing grooves.
The size of the drive sprocket can have a major impact on the overall life of the linear chain. It determines how fast the chain can go and how much horsepower it can produce. An 11-tooth chain will hit about half its rated speed, but only about 30 percent of its rated horsepower. You can extend the life of your linear chain by choosing a drive sprocket with a higher number of teeth. It is best to choose a drive sprocket with a high number of teeth, but make sure the number of teeth is even. This will ensure that your chain wear is evenly distributed.
China Roller chain and sprocket manufacturer Motorcycle 10b-1 roller chain China in Ranchi India Roller Transmission Slat Standard Drag Mining Food Processing Sewage Treatment Timber Harvesting Agriculture Textile Machinery Conveyor Chain with ce certificate top quality low price
We – EPG Team the largest Chain and agricultural gearbox manufacturing facility in China with 5 various branches.
The team has taken part in the producing and revising of ISO/TC100 worldwide chain common numerous years in good results and hosted the sixteenth ISO/TC100 Worldwide once-a-year assembly in 2004. ISO EPG is a single of the biggest makers in China. We have advanced machines for manufacturing and new technologies screening ability . By way of adopting new technological innovation from British, German, U.S.A, our merchandise are ideal sellers all in excess of European, The usa, and Southeast Asia.9001 licensed producer of precision roller chains. Sorts contain solitary and a number of strand, hollow pin, aspect bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. ISO 9001, ISO/TS 16949 and AS9100 certified. Maker of standard and custom roller chains for use in a extensive variety of programs. Roller chains are available in solitary-pitch, double-pitch and precision kinds. Meets or exceed ANSI specifications.
bike Roller Transmission slat stHangZhourd drag Mining Meals processing Sewage treatment Timber harvesting EPT Textile equipment conveyor Chain
The use of authentic tools manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our business and the outlined substitution areas contained herein are not sponsored, approved, or produced by the OEM.
